B&M Torque Converter Holeshot 3400-3800 Stall With 11-7/16" Bolt Circle C4 Mustang 1965-1981

When you modify the engine in your 1965-1981 Mustang with a C4 Automatic Transmission finding additional RPMs can be daunting. Not anymore, this B&M 50454 3400-3800 Stall Holeshot Torque Converter with a 11-7/16" Bolt Circle is specifically designed to utilize the higher stall speed to access a higher RPM range. The end result is a massive boost in acceleration allowing your pony to gallop ahead of the herd.

Holeshot converters feature furnace brazed turbine and impeller, new precision steel alloy pump drive tube, new heavy duty needle bearings between the stator and impeller (not a thrust washer) and needle bearings between the stator and turbine. Other features include a new turbine hub and new springs and rollers in the stator. This converter has a 11-7/16” inch bolt circle, 26 input spline and a 1.375 inch crank pilot. If your vehicle is equipped with a plate type nitrous system, please refer to the Nitrous Holeshot line of converters. The stall speed listings are based on engines producing 230 pounds per feet of torque at 2,500 RPM. More torque at 2,500 RPM will give you more stall speed, less torque at 2,500 RPM will give you less stall speed than the stall speed ratings indicated.

Features and Benefits:
- Needle bearing between stator and turbine
- Higher Stall Speed
- Quicker acceleration
- Furnace brazed impeller
- Furnace brazed turbine
- Steel alloy pump drive tube
- 1.38 crank pilot
- Easy to install

Please Note: If your vehicle is equipped with a plate type nitrous system, please refer to the Nitrous Holeshot line of converters.

Often times, upgrading the engine on your Mustang also means that you have to upgrade other components to be able to handle the extra power. One of the components most frequently requiring an upgrade is the transmission parts, and one of the leaders in providing those parts is B&M Racing & Performance. CJ Pony Parts has many parts from B&M Racing & Performance, giving you lots of ways to get your Mustang ready to perform.

Order this B&M 50454 3400-3800 Stall Holeshot Torque Converter with a 11-7/16" Bolt Circle for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974 1975, 1976, 1977, 1978, 1979, 1980 and 1981 Mustang with a C4 Automatic Transmission today from CJ Pony Parts.