Centerforce Clutches DYAD DS Clutch/ Flywheel Kit 10.4” Twin Disc Mustang 5.0L 2011-2017

Upgrade the performance of your 2011-2017 5.0L Mustang with a Centerforce Clutches DYAD DS 10.4” Twin Disc Clutch and Flywheel Kit! The included pressure plate features a centrifugal weight system that provides a superior clamp load over stock while the patented ball bearing actuated pressure plate provides a light and smooth pedal effort. This Centerforce Clutches Clutch and Flywheel Kit is engineered and developed to provide up to 1300 ft/lbs. at the crank for enhanced performance. The combination of improved holding power with light pedal effort results in exceptional driver comfort for increased control and smooth shifting.

Features & Benefits:
- Holds 500-1300 ft/lbs. of Torque
- Organic/Carbon Composite Sprung Hub Disc
- Provides Light and Smooth Pedal Effort
- Improved Driver Control
- Patented Multi-Disc Design
- 10.4” Diameter
- Weighs 45.95 lbs.
- 1”x23M Spline Input Shaft
- 164 Tooth Gear for 6 Bolt Crank with 0oz Counterbalance
- Centrifugally Assisted
- Ball Bearing Design
- Positive Drive Floater
- Precision Balanced
- ARP Fasteners
- Made in the USA

Centerforce Clutches offer Twin Discs that are equipped with organic segmented facings to provide increased holding capacity while the sprung/dampened drive disc hub provides smooth drivability. You’ll notice quicker RPMs thanks to the DYAD DS clutch’s equipped lightened billet steel flywheel that provides a low inertia. Every component is designed, machined, and assembled in the USA and are match balanced and ready for installation.

Kit Includes:
- Pressure Plate
- Discs and Floater
- Flywheel and Bolts
- Pilot Bearing
- Alignment Tool
- Specification Card

Vehicle Fitment:
- 2011-2017 5.0L Mustangs
* Will NOT fit V6, EcoBoost, GT350/R, or any automatic models.

Tech Tip: A similar version of this Kit is available for models equipped with a 26-Spline Input Shaft. Please see P/N: CK443

Please Note: Vehicles may experience some floater noise during operation.