Centerforce Clutches DYAD XDS Clutch/ Flywheel Kit 10.4” 26-Spline Twin Disc Mustang 5.0L 2011-2017

With this Centerforce Clutches DYAD XDS 10.4” Twin Disc Clutch and Flywheel Kit, you can upgrade the performance of your 2011-2017 5.0L Mustang. The disc pack included in this kit is equipped with metallic friction material which provides an increased holding capacity up to 1600 ft/lbs. of torque. The billet pressure plate offers a superior clamp load while also providing you with a light pedal effort for improved control when you need it the most.

Features & Benefits:
- Holds 700-1600 ft/lbs. of Torque
- Cerametallic Material Sprung Hub Disc
- Provides Light and Smooth Pedal Effort
- Improved Driver Control
- Patented Multi-Disc Design
- Race Proven Paddle Style Discs
- 10.4” Diameter
- Weights 48.45 lbs.
- 1-1/8” x 26-Spline Input Shaft
- 164 Tooth Gear for 8 Bolt Crank with 0oz Counterbalance
- Centrifugally Assisted
- Positive Drive Floater
- Precision Balanced
- ARP Fasteners
- Made in the USA

DYAD XDS clutches from Centerforce Clutches are equipped with a lightened billet steel flywheel which will provide low inertia, allowing quicker RPMs for more sensitive acceleration and deceleration. Every component within this kit is designed, machined, and assembled in the USA. To top it all off, this kit arrives match balanced and ready for installation with the included ARP fasteners, so you and your Mustang can hit the road faster.

Kit Includes:
- Pressure Plate
- Discs and Floater
- Flywheel and Bolts
- Pilot Bearing
- Slave and Shim
- Alignment Tool
- Specification Card

Vehicle Fitment:
- 2011-2017 5.0L Mustangs Equipped with a 26-Spline Input Shaft

Tech Tip: A similar version of this Kit is available for models NOT equipped with a 26-Spline Input Shaft. Please see P/N: CK442

Please Note: Vehicles may experience some floater noise during operation.