Classic Instruments 6-Gauge Set G-Stock Series With Scott Drake 6-Hole Instrument Bezel Mustang 1965-1966

Change up the interior of your classic 1965-1966 Mustang by upgrading your instrument gauge cluster with this Classic Instruments G-Stock Series 6-Gauge Set with Scott Drake 6-Hole Instrument Bezel from CJ Pony Parts! This gauge and instrument bezel combo will give the interior of your Mustang a whole new custom appearance.

Classic Instruments Gauge and Instrument Bezel Kit Features and Benefits:
- Six Hole Design
- Inserts in Multiple Finishes
- Custom Instrument Styling
- Classic Styled Gauges with Modern Technology
- Direct Fit Replacement Bezel with High-Quality Classic Instrument Gauges

Scott Drakes instrument bezel is a six-hole design that features two 3-3/8” holes and four 2-1/16” holes. The two larger holes are used for the larger tachometer and speedometer gauges, while the four smaller ones are for the fuel level, oil pressure, water temperature, and volt gauges. The bezel also features integrated turn signal and high beam indicator lenses that reuse the OEM bulbs and connectors. Being a direct fit replacement, the instrument bezel will easily mount right into the factory location of your Mustangs instrument panel. This instrument bezel will come in your choice of either brushed aluminum, walnut woodgrain, or a black camera case finish. Scott Drake designed this bezel to give your classic Mustang a custom touch, yet still, retain its factory appearance.

Gauges Included:
- 3-3/8" 140 MPH Speedometer
- 3-3/8" 8,000 RPM Tachometer
- 2-1/8" Fuel Level ­75-10 ohm Fuel Sender
- 2-1/8" Oil Pressure
- 2-1/8" Water Temperature
- 2-1/8" Volts

Classic Instruments Tachometer will now end at 8,000 RPM and the speedometer has had its reading increased to 140 MPH. These gauges feature a low step bezel with a flat glass lens. All of the necessary sending units are included with the gauges, however, a fuel sending unit is not included but the fuel gauge has been set to work with stock 75-10 ohm fuel sender units. The gauges are all 12 volt electronic and will mount using a supplied u-bracket. Installation hardware, as well as easy to follow step-by-step instructions are included to ensure that you will have your gauges wired up and working in no time!

Please Note: The outer four holes in the bezel are 2-1/16”, and will need to be opened up slightly for proper fitment of the 2-1/8” gauges.

After many years on the road, the gauges on your retro ride might not be working too reliably, if they're even working at all. Repairing them is often complicated, and original-style replacements aren't always easy to find. With Classic Instruments, you can find the vintage-style gauges you're looking for, with modern technology which will keep them working for decades to come.

Order this Classic Instruments G-Stock Series 6-Gauge Set with Scott Drake 6-Hole Instrument Bezel for your 1965-1966 Mustang from CJ Pony Parts today!