Classic Instruments Hot Rod Series 6-Gauge Set Mustang 65-66 W/ Scott Drake 6-Hole Instrument Bezel

Scott Drake's instrument bezel is a six-hole design that features two 3-3/8” holes and four 2-1/16” holes. The two larger holes are used for the larger tachometer and speedometer gauges, while the four smaller ones are for the fuel level, oil pressure, water temperature, and volt gauges. The bezel also features integrated turn signal and high beam indicator lenses that reuse the OEM bulbs and connectors. Being a direct fit replacement, the instrument bezel will easily mount right into the factory location of your Mustangs instrument panel.

Features and Benefits:
- 6-hole design with custom instrument styling
- Classic styled gauges with modern technology
- Direct fit replacement bezel in your choice of finish
- Includes installation hardware
- Includes instructions

Classic Instruments Tachometer will now end at 8,000 RPM and the speedometer has had its reading increased to 140 MPH. These gauges feature a low step bezel with a flat glass lens. All of the necessary sending units are included with the gauges, however, a fuel sending unit is not included but the fuel gauge has been set to work with stock 75-10 ohm fuel sender units. The gauges are all 12 volt electronic and will mount using a supplied u-bracket.

Gauges Included:
- 3-3/8" 140 MPH Speedometer
- 3-3/8" 8,000 RPM Tachometer
- 2-1/8" Fuel Level ­75-10 ohm Fuel Sender
- 2-1/8" Oil Pressure
- 2-1/8" Water Temperature
- 2-1/8" Volts

Please Note: The outer four holes in the bezel are 2-1/16” and will need to be opened up slightly for proper fitment of the 2-1/8” gauges.