Classic Instruments 6-Gauge Set Vintage Series With Scott Drake 6-Hole Instrument Bezel Mustang 1965-1966

Spruce up the interior of your classic 1965-1966 Mustang with this Classic Instruments Vintage Series 6-Gauge Set with Scott Drake 6-Hole Instrument Bezel from CJ Pony Parts! This gauge set and instrument bezel combo will give your Mustangs interior a great custom appearance while still retaining a factory look.

Classic Instruments Gauge and Instrument Bezel Kit Features and Benefits:
- Six Hole Design
- Inserts in Multiple Finishes
- Custom Instrument Styling
- Classic Styled Gauges with Modern Technology
- Direct Fit Replacement Bezel with High-Quality Classic Instrument Gauges

This instrument bezel from Scott Drake comes with six holes that feature two larger 3-3/8” holes and four smaller 2-1/16” holes. The speedometer and tachometer will fit perfectly in the two 3-3/8” holes, while the fuel level, oil pressure, water temperature, and volt gauges will fit in the four 2-1/16” holes with slight modifications to the holes. Also featured on the bezel are integrated turn signal and high beam indicator lenses that will work with the use of the OEM bulbs and connectors. The bezel is a direct fit replacement, meaning that it will mount right in the factory location for a quick and easy installation. With your choice of a brushed aluminum, walnut woodgrain or black camera case finish, the bezel will add a custom touch to your Mustang’s interior while still keeping a factory appearance.

Gauges Included:
- 3-3/8" 140 MPH Speedometer
- 3-3/8" 8,000 RPM Tachometer
- 2-1/8" Fuel Level ­75-10 ohm Fuel Sender
- 2-1/8" Oil Pressure
- 2-1/8" Water Temperature
- 2-1/8" Volts

Classic Instruments have increased the tachometers range to end at 8,000 RPM and increased the speedometers reading to 140MPH. All of the gauges feature a stainless low step bezel with flat glass lenses and handcrafted instrumentation. The necessary sending units are included, with the exception of a fuel sending unit. But the fuel gauge has been set to work with a stock 75-10 ohm fuel sender. All of the gauges are 12 volt electronic and mount with the use of the supplied u-bracket. Installation hardware and easy to follow step-by-step instructions are also included to make installation of your new gauges as quick and easy as possible.

Please Note: The outer four holes in the bezel are 2-1/16”, and will need to be opened up slightly for proper fitment of the 2-1/8” gauges.

After many years on the road, the gauges on your retro ride might not be working too reliably, if they're even working at all. Repairing them is often complicated, and original-style replacements aren't always easy to find. With Classic Instruments, you can find the vintage-style gauges you're looking for, with modern technology which will keep them working for decades to come.

Order this Classic Instruments Vintage Series 6-Gauge Set with Scott Drake 6-Hole Instrument Bezel for your 1965-1966 Mustang from CJ Pony Parts today!