Classic Instruments White Hot Series 6-Gauge Set Mustang 65-66 W/ Scott Drake 6-Hole Instrument Bezel

The Scott Drake instrument bezel in this 6-gauge set comes with two larger 3-3/8” holes and four smaller 2-1/16” holes. The speedometer and tachometer will fit perfectly in the two 3-3/8” holes, while the fuel level, oil pressure, water temperature, and volt gauges will fit in the four 2-1/16” holes after slight modifications to the holes. Also featured on the bezel are integrated turn signal and high beam indicator lenses that will work with the use of the OEM bulbs and connectors. The bezel is a direct fit replacement that adds a custom touch to your Mustang’s interior while keeping a factory appearance.

Features and Benefits:
- Adds custom instrument styling to your interior
- Classic styled gauges with modern technology
- 6-hole bezel design in your choice of finish
- Direct fit replacement parts

Classic Instruments have increased the tachometers range to end at 8,000 RPM and increased the speedometers reading to 140MPH. All of the gauges feature a stainless low step bezel with flat glass lenses and handcrafted instrumentation. The necessary sending units are included, with the exception of a fuel sending unit. But the fuel gauge has been set to work with a stock 75-10 ohm fuel sender. All of the gauges are 12-volt electronic and mount with the use of the supplied u-bracket. Installation hardware and easy to follow step-by-step instructions are also included to make installation of your new gauges as quick and easy as possible.

Gauges Included:
- 3-3/8" 140 MPH Speedometer
- 3-3/8" 8,000 RPM Tachometer
- 2-1/8" Fuel Level ­75-10 ohm Fuel Sender
- 2-1/8" Oil Pressure
- 2-1/8" Water Temperature
- 2-1/8" Volts

Please Note: The outer four holes in the bezel are 2-1/16”, and will need to be opened up slightly for proper fitment of the 2-1/8” gauges.