COMP Cams Camshaft Xtreme Energy Hydraulic Roller Tappet 1200-5800 RPM V6 1994-2004

COMP Cams:
44-701-9
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 119.51ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
MSRP $416.64
$374.98
You save 10%

COMP Cams Xtreme Energy Hydraulic Roller Tappet Camshaft with a 1200 to 5800 RPM Range for Mustangs with a V6 Engine.

This hydraulic roller tappet camshaft will fit 1989 to present 3.8L and 4.2L engines.

Xtreme Energy camshafts are a best seller due to their excellent all-around performance in street applications. Increased responsiveness and more area under the curve are delivered due to quicker opening lobe profiles. More vacuum is created which allows a step up in duration for greater performance. COMP Cams roller rockers and matched valve springs work best with this camshaft. COMP Cams roller rockers and matched valve springs work best with these camshafts. Other performance parts are recommended and sometimes required (intake manifold, headers, etc.) for optimum performance.

The Xtreme Energy 259HR115 camshaft offers strong torque. This camshaft is an excellent stock replacement for Super Coupes.

Camshaft Specifications:
- RPM Range: 1200 to 5800
- Valve Timing: 0.006
- Lobe separation (degrees): 115
- Intake Centerline (degrees): 108
- Valve Lash: Hydraulic
- Duration: Intake 259/Exhaust 271
- Duration @ .050" Lift: Intake 204/Exhaust 216
- Valve Lift: Intake 0.480/Exhaust 0.480
- Lobe Lift: Intake 0.277/Exhaust 0.277

"

Installation Difficulty

Difficult
Difficult

Advanced skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 6.8ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Will this work on a 3.9 liter 04 mustang,apparently the 3.8 & 3.9 are pretty much the same engine with only a few exceptions?

Asked by: Ngtowl1966
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: rk cjpp
Date published: 2017-08-31

With these cams 44-701-9 only need to change valve spring rest of the engine can remain stock?

Asked by: tk6971
COMP Cams roller rockers and matched valve springs work best with this camshaft. COMP Cams roller rockers and matched valve springs work best with these camshafts. Other performance parts are recommended and sometimes required (intake manifold, headers, etc.) for optimum performance.
Answered by: rk cjpp
Date published: 2018-10-27

Is this a good choice for my 2004 3.8L v6 base mustang 

Asked by: mus1
Yes, COMP Cams roller rockers and matched valve springs work best with these camshafts. Other performance parts are recommended and sometimes required (intake manifold, headers, etc.) for optimum performance.
Answered by: rk cjpp
Date published: 2016-10-17
  • y_2019, m_9, d_17, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_447019, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 158.82ms
  • QUESTIONS, PRODUCT