Edelbrock Intake Manifold and Carburetor Kit 4V Performer RPM Intake With Thunder AVS 800 CFM Carburetor 390/428

CJ's Part Number:
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 112.21ms
  • bvseo-msg: HTTP status code of 404 was returned;

Edelbrock 4-Barrel Performer RPM Intake Manifold and Thunder AVS 800 CFM Carburetor Kit for Mustangs with a 390 or 428 Engine.

If you're looking to add some serious horsepower to your big block 390 or 428 with a new intake manifold and carburetor. This 4-barrel Intake Manifold and Carburetor Kit from Edelbrock has everything you need to get your engine running like a champion. Edelbrock makes it easy for you to upgrade your induction system with the absolute best combination of proven Edelbrock performance and looks in this single kit!

Kit Includes:
- Performer RPM Series Intake Manifold
- Thunder Series AVS 800 CFM Carburetor with Electric Choke
- Chrome Fuel Inlet
- Premium-Quality Edelbrock Intake Gasket Set
- All Necessary Hardware: Intake Bolt Set and Carburetor Stud Kit

Edelbrock's Performer RPM FE Intake Manifold is designed for high-performance street 390, 406, 410, 427, and 428 c.i.d. Ford big block V8 engines with standard 390-428 c.i.d., 427 low/medium-rise or Edelbrock Performer RPM FE heads. The dual-plane constant cross-sectional area design builds low and mid-range acceleration while optimized runner paths make great top-end horsepower. It has a provision for adding the PCV or breather flange at the rear. There is no exhaust crossover passage. These intake manifolds are great for street or strip use with a range of 1500-6500 RPM.

The Thunder Series AVS 800 CFM Carburetor is non-EGR designed and calibrated for optimum street performance in high-horsepower big block 390 and 428 engines.

Carburetor Specifications:
- Choke - Electric
- CFM - 800
- Barrel - 4V
- Metering Jets - Primary .113, Secondary .101
- Metering Rods - .068 x .047
- Step-Up Spring - Orange (5" Hg)
- Square-flanged

These kits are available with a Satin finish or Edelbrock's top of the line EnduraShine finish.

Edelbrock's EnduraShine is a bright silver chrome finish with powder coated durability. It utilizes a three step Vacuum Metalizing Process: base coat, aluminum coat, and clear top coat to enhance abrasion and chemical resistance as well as discoloration from heat. With the EnduraShine finish, you will never have to polish again!

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 7.15ms
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 117.44ms
  • bvseo-msg: HTTP status code of 404 was returned;