Ford Performance Hood Strut Kit With Laser-Engraved Ford Performance Logo Mustang 2005-2014

Ford Performance:
86% of 100


  • Great Upgrade from OE Prop Rod
  • Gas Struts are Rated for 90Lbs
  • Includes Necessary Brackets
  • No Drilling Required
MSRP $99.00
You save 10%

Ford Performance Hood Strut Kit with a Laser-Engraved Ford Performance Logo for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Mustangs.

When you raise the hood on your 2005-2014 Mustang to show off your engine compartment, you could just use the standard prop rod that comes with your factory or aftermarket hood. Or you could upgrade to the Ford Performance M-16826-M Hood Strut Kit, complete with two gas struts and all of the hardware you'll need to install them!

Features and Benefits:
- Replaces Prop Rod
- Secures Stock or Aftermarket Hoods
- 90 Lbs. Gas Struts
- Made of Lightweight Steel and Aluminum
- Durable Black Powder-Coated Finish
- Laser-Engraved White Ford Performance Logo on Both Struts
- Bolt-On Brackets

Kit Includes:
- 1-Drivers side hood bracket (marked with “D”)
- 1-Passengers side hood bracket (marked with “P”)
- 2-Lower fender brackets (same for both sides)
- 2-Gas struts
- 1-Flat socket head cap screw (For 2005-2009 only)

Tech Tip: For 2005-2009 models, AC accumulator bracket pre-installation modifications are necessary using the included Flat socket head cap screw. For 2010-2014 models, pre-installation modifications are needed to relocate the Sound Tube Canister. Please see the Installation Instructions for more details.

Please Note: If your aftermarket hood is lighter than your factory hood, use caution when opening the hood due to the power of these struts.

These struts will take over the job of raising your hood after you start to lift it. Plus, you won't need to use a prop rod after you install these struts because they'll also keep your hood open, even if it's windy outside or someone bumps into your hood while it's open! These gas struts are made out of lightweight steel and aluminum, and they're rated at 90 lbs. They also feature a durable black powder-coated finish and a laser-engraved white Ford Performance logo, which will give your engine bay a nicer and cleaner appearance. No drilling is required to install these struts either since the included brackets are designed to bolt into the existing mounting holes that are already on your hood!

California Residents: Proposition 65 Warning

Installation Difficulty


Novice skill is required for this installation.

Installation Videos

Video Transcript

We’re here, with a set of Ford Performance Hood Struts fitting your 2005 through 2009 Mustang.

This Ford Performance Hood Strut Kit's going to replace the factory prop rod on all 2005 through 2009 Mustangs, and work with the stock and most aftermarket hoods. This is a no-drill design, meaning you can bolt them on to factory locations, and it features custom struts and lightweight steel and aluminum brackets. This Ford Performance Hood Strut Kit and other Ford Performance parts for your late model Mustang are available here at

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.