Ford Performance Front Strut Mount Upgrade Pair V6/GT 2005-2010/GT500 2007-2014

Ford Performance:
M-18183-C
Ford Performance Front Strut Mount Upgrade Pair V6/GT 2005-2010/GT500 2007-2014 is rated 4.8 out of 5 by 6.
  • y_2020, m_7, d_7, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_M18183C, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 122.3ms
  • REVIEWS, PRODUCT

Highlights

  • OE On 2011-2014 Shelby GT500
  • OE Construction
  • Direct-Fit Replacement
  • Increased Durometer Over Oe
MSRP $159.00
$96.99
You save 39%

Pair of Upgraded Ford Performance Front Strut Mounts for all 2005, 2006, 2007, 2008, 2009 and 2010 V6 and GT Mustangs and all 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Shelby GT500s.

These Ford Racing Front Strut Mounts are the original equipment found on the 2011-2012 Shelby GT500 Track Pack option. They are a direct fit for the 2005-2010 V6 and GT Mustang as well as the 2007 to present model Shelby GT500. With the installation of aftermarket struts and springs, such as Ford Racing's 2005-2010 lowering springs and dampers, they will also fit the 2011-2014 V6, GT and Boss Mustangs.

So if the original factory strut mounts have become worn and are making an irritating noise, this pair of upgraded Ford Racing Front Strut Mounts is a great choice for the ideal replacement part you need. That noise is a sign that the bushings have lost their support and structural integrity that is necessary to provide high performance handling. The robust, sturdy bushings with these mounts possess a significantly increased durometer that considerably improves the handling and performance of all 2005-2010 V6 and GT Mustangs and all 2007 and up Shelby GT500s.

If you're looking for parts for your Ford Mustang, Bronco or truck, you should start by looking at the more than 600 premium parts that CJ Pony Parts offers from Ford Performance (formerly Ford Racing). By buying your Ford Performance parts from CJ Pony Parts, you know you're getting your high-quality parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. When you buy your Ford Performance parts from CJ Pony Parts, you know you have a winning combination--this means dependable, quality care for your Ford vehicle!

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Installation Videos

Video Transcript

We're here with the Ford Racing 2011 GT500 Strut Mount kit. These strut mounts were factory on any GT500 order with the SVT performance pack option. It would make an excellent upgrade for any 2005 and newer Mustang GT or V6. The strut mount is exactly that; it allows the strut to attach the body of your Mustang. The strut's going to come through the center here; these four bolts are going to attach it to your shock tower.

Underneath, the spring's going to ride on this rubber plate. The plate has ball bearings allowing for movement. Over time, they can dry out and cause some noise in your suspension. The GT500 version has much larger bearings, making it a heavy-duty upgrade for both a Mustang GT or a V6. If you're getting a clunking noise from the front end of your 2005 or newer Mustang, many times the strut mounts going to be culprit. If you're looking to upgrade your suspension with aftermarket struts and aftermarket springs, a set of heavy duty strut mounts is a must have.

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from Great Strut Mount! These mounts fixed the front suspension rattle on my '08 GT500.
Date published: 2015-11-04
Rated 5 out of 5 by from Mid-level Install, really great improvement! I recently purchased these strut mounts for my 06' mustang gt. I had some front end noise and I saw the video from CJ Pony Parts on YouTube. If you have had any experience with mechanic work, these will install easily with the proper tools. If you're a newbie, I would be hesitant about installing these myself. Here are my tips that are left out of the video. Get all deep well sockets, including your impact. You can use a quality electric impact or air impact(would not recommend attempting without one of these, it will take forever). If your car has miles on it, go ahead and replace the sway bar end-link bushings and check your lower control arms. Grab a plastic housed drop light($14 at Wal-mart) I tried to find the spring compressor he uses in the video without any luck, but you can rent a quality spring compressor from any auto parts store, I rented from Advanced Auto and paid for the part in full and once returned got all my money back. Pay attention to how you tighten the spring compressor and where you place the tabs!!! If you tighten unevenly, you will have one heck of a time trying to properly seat the mount.
Date published: 2016-08-06
Rated 5 out of 5 by from PERFECT! Replaced these as part of the Steeda Pro Action shock/struts......so glad I did. He handles flat, holds the road..TIGHT!
Date published: 2017-04-12
Rated 4 out of 5 by from Strut mount I was installing lowering springs, I purchased these along with new struts and bump stops. I had a noise before all of this when i would go over bumps. I believe the old strut mounts were the problem. I replaced all listed with lowering springs and all the noise is gone.
Date published: 2019-06-11
Rated 5 out of 5 by from the perfect part the perfect part for Ford Performance Parts Mustang Coupe Dynamic Dampers M-18000-A . *note that j&m adjustable caster camber plates will fit this Dampers with Ford Racing Lowering Springs.
Date published: 2020-02-22
Rated 5 out of 5 by from Looks a lot stronger then the original looks stronger and harder, i like it :), hard to say how much this contributes but probably a lot .
Date published: 2018-05-10
  • y_2020, m_7, d_7, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_M18183C, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.63ms
  • REVIEWS, PRODUCT

Do these upper strut mounts come with new hardware?  Common sense tells me any new part should have new hardware, but, you never know. Thank you. God blessings.

Asked by: Deacon Doug
You reuse your existing hardware.
Answered by: rk cjpp
Date published: 2020-03-04

I have a 2013 Mustang Coupe V6 will thinking about lowering it will these fit?

Asked by: JoseT1012
Sorry it will not.
Answered by: rk cjpp
Date published: 2019-10-28

Would you please confirm that the strut mounts are indeed sold as a pair? Thank you.

Asked by: Mountainbiker
They are sold as a pair.
Answered by: rk cjpp
Date published: 2019-06-26

The rubber isolator that's on the frpp strut mount is needed when installing caster camber plates no? I'd reuse the stock ones but I'm sure there pretty chewed up. Unless you sell that rubber isolator separately?

Asked by: Klynch
That depends on the cater camber kit being used. Check the installation instructions, some use part of the upper mount.
Answered by: rk cjpp
Date published: 2019-05-14

Can you use these with caster camber plates? If so, how do you separate the bearing plate ?

Asked by: Klynch
These are not used when installing caster camber plates.
Answered by: rk cjpp
Date published: 2019-05-08

Does it fit for my 2012 GT with ST-X Suspension Coil Over kit (13230045)?

Asked by: Thorgar
Yes they will fit.
Answered by: rk cjpp
Date published: 2018-10-24

Is it compatible with my 2008 Ford Mustang V6?

Asked by: daniel77ly
Yes.
Answered by: rk cjpp
Date published: 2018-10-24

I need to replace my upper strut mounts I already have eibach sport line lowering springs on the car. what do you recommend me to put on the car? I am also looking to reaplace the struts as well?

Asked by: Brandon187
With your setup and what you are looking to do, I would recommend P/N: CCP42
Answered by: CJPP Dave
Date published: 2018-07-30
  • y_2020, m_7, d_6, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_en_US, sid_M18183C, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 133.78ms
  • QUESTIONS, PRODUCT