Fuel Tank Kit EFI 16 Gallon With Sending Unit/ 255 LPH Fuel Pump Mustang 1965-1968
- Supports up to 600 Horsepower
- 32-3/4" x 24-1/2" x 7-1/2"
- Prevents Fuel Starvation
- Galvanized Steel
EFI 16 Gallon Fuel Tank Kit with a Sending Unit and 255 LPH Fuel Pump for 1965, 1966, 1967 and 1968 Mustangs.
Completely update the fuel assembly on your 1965-1968 Mustang with a top-of-the-line modification by purchasing this all-new EFI 16 Gallon Fuel Tank Kit with a Sending Unit and a 255 LPH Fuel Pump from CJ Pony Parts! Electronic Fuel Injection ready, this kit will provide you with everything you need to have your vintage Pony's fuel assembly functioning at a top-quality level for many years to come.
Features and Benefits:
- EFI-Style Internal Baffling
- Rust-Resistant Mounting Plate
- Electronic Fuel Injection Ready
- 16-Gallon Capacity Tank
This kit is highlighted by a brand-new fuel tank that holds 16 gallons and is electronic fuel injection ready. It has an overall size of 32-3/4" x 24-1/2" x 7-1/2" while being coated in durable and reliable galvanized steel. This tank has an EFI-style internal baffling that features an extra-large, 4.3-liter internal fuel tray that will help prevent fuel starvation, especially when accelerating and cornering. The fuel tank also comes with a new filler hose and will mount into place using the original holes and hardware.
The fuel pump in this kit uses 255 liters per hour and is designed specifically to be used with the GPA-series module that is included. The pump will support the performance of up to 600 HP from your classic Mustang. A 73-10 Ohms fuel sending unit also comes with this kit and will work with your original, factory-style fuel gauge.
- 16 Gallon EFI Fuel Tank
- GPA-Series Fuel Pump Module
- 255 LPH Fuel Pump
- 73-10 Ohms Fuel Sending Unit
- Roll Over Vent Valve
- Filler Hose
*Does not include supply or return lines from fuel tank to engine.
The heavy 10-gauge mounting plate in this kit will eliminate any potential warping. It contains the correct fittings for the supply, return, vent and electrical connector. To make sure it is rust-resistant, the mounting plate is capped off with a yellow zinc-plated finish. This fuel tank kit will include the proper internal wiring harness, filter sock and insulator sleeve that you'll need for your Mustang.
Please Note: A Roll Over Vent Valve is included with this tank, this is an optional component that is not required if you are using a vented cap.
California Residents: Proposition 65 Warning