Holley Carburetor 750 CFM HP 4-Barrel Mechanical Secondaries Polished
Holley Polished HP 750 CFM 4-Barrel Carburetor with Mechanical Secondaries.
If you’re looking for a performance carburetor for your engine, check out this high quality HP Holley Carburetor today. This carburetor is more of a performance upgrade for all engines with a square bore intake manifold. Holley manufactures this Holley carburetor for more of a high performance street car or a race car. The HP Carburetor features a dual feed fuel inlet, adjustable air bleeds, a contoured venturii inlet and four corner idle for precise idle control.
- Polished Finish
- Street/Strip Calibration
- Contoured Venturri Inlet
- Screw in Air Bleeds
- Mechanical Secondaries
- Dual Accelerator Pumps
- Dual Feed Fuel Inlets
- 100% Wet-flow Tested
Please Note: This Holley Carburetor will Not work with AOD Automatic Transmissions.
Holley polishes the body of the carburetor to give it a high quality finish. The main body of the HP Carburetor features four contoured venturri which offers balanced airflow for increased horsepower. Screw in air bleeds can be finely tuned to get the most performance out of your carburetor. The dual accelerator pumps add additional fuel under heavy acceleration. All Holley carburetors are 100% wet-flow tested by Holley technicians to assure it arrives ready to run right out of the box.
The carburetor on your vehicle is a part that you rely upon to work. Without it, your vehicle isn't going anywhere. That's why you want to make sure you get a high quality part when you replace or upgrade your carburetor, and no carburetor is going to have higher quality than the products from Holley. With more than a century of experience, and dozens of products available from CJ Pony Parts, you know you're getting the best.
Purchase a new Holley Polished HP 750 CFM 4-Barrel Carburetor with Mechanical Secondaries from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
All of the Holley carburetors are going to be available in the standard finish shown here, the polished version, or a fully polished aluminum casing with your choice with electric or manual choke. No matter what kind of horsepower your Mustang is making, here at CJ Pony Parts we have the perfect Holley carburetor for your application.
This product will fit the following Bronco years:
This product will fit the following C10 years:
This product will fit the following Mustang years: