Legendary Wheel Co. 17"X7" HB45 Alloy Wheel Mustang 65-73 Charcoal/ Machined

Legendary Wheel Co.'s HB45 alloy wheel has a one-piece design to hold up over time. It's manufactured using cast aluminum and features a charcoal finish that will pair perfectly with any Mustang color or aesthetic. For added protection over the years against the harsh elements, the wheel is finished with a gloss clear coat. Because this wheel was built for 1965-1973 Mustangs with the original 5 x 4.5" bolt pattern with 4.25" of backspacing, Legendary Wheel Co. based its design on the vintage A/C Cobra and modern "Eleanor" wheels, marrying the past and present in one seamless product. For your convenience, this wheel will clear most aftermarket brake kits without any modifications.

Wheel Specifications:
- Size: 17" x 7"
- Lugs: 5 x 4.5"
- Finish: Charcoal with Machined Lip
- Offset: +6.9mm
- Backspacing: 4.25"
- Weight: 20 lbs.
- Center Cap: Included
- Single Wheel or Set of 4 Wheels

Tech Tip: Even though these wheels are intended to fit most 5-lug 1965-1973 Mustangs with the original 5 x 4.5" bolt pattern and 4.25" of backspacing. It is a general rule of thumb, you should always measure and verify clearance before ordering aftermarket wheels, as modifications may, or will be necessary for fitment on your classic Mustang.

Additional Notes:
- For 1965-1966, 225/45-17 tires are recommended with 17x7" wheels but will require modifications for correct fit. For 1967-1968, 235/45-17 tires are recommended with 17x7" wheels. For 1969-1973, 245/45-17 tires are recommended with 17x7" wheels.
- These wheels require the use of extended thread lug nuts WHLLN118 or extended wheel studs.

*Lug nuts for installation (P/N: WHLLN19) are sold separately.
*Legendary Wheel Co. "L" logo Center caps are included with the Legendary Wheel Co. wheels. Spinner style center caps (LWCSAS) are sold separately. Lug nuts are not included, but CJ Pony Parts carries the correct lug nuts for installation of Legendary Wheel Co. wheels.