Legendary Wheel Co. HB45 Alloy Wheel And Tire Package 15"x7" Gold Haze/Machined 4-Lug Mustang 1965-1973

Is it time to restore your classic Mustang? Why not do some upgrading while you're at it? CJ Pony Parts offers this custom Legendary Wheel Co. Gold Haze and Machined 15" x 7" HB45 Alloy Wheel and Tire Package. This set of four wheels comes with your choice of tires that ship to you balanced and mounted for the easiest install you'll do during your project.

This cast aluminum wheel is finished with a brilliant gold haze that's sure to set you and your Mustang apart on the road and in the show room. The design was inspired by by both the vintage A/C Cobra and the modern "Eleanor" wheels to bring together decades past and decades happening into a seamless, one-piece part. This wheel was built to fit most 4-lug 1965-1973 Mustangs with the factory 4 x 4.5" bolt pattern and 4.25" of backspacing. For your convenience, it will clear most aftermarket brake kits. This wheel does not include the lug nuts necessary for installation and can be used with the optional screw-on spinners that makes it timeless.

These Legendary Wheel Co. 4-lug HB45 Alloy wheels are available with your choice of tires in sets of four. All wheel and tire packages from CJ Pony Parts are professionally mounted and balanced in-house and shipped to your door ready to bolt on. Be sure to order a lug nut kit to properly mount and secure your new wheels, as lug nuts are not included in this package.

Wheel LW90-50744F Information:
- Size: 15” x 7”
- Lugs: 4 x 4.5”
- Finish: Gold Haze with Machined Lip
- Offset: +6.9mm
- Backspacing: 4.25”
- Weight: 16 lbs.
- Center Cap: Included

Additional Notes:
- For 1965-1966, 215/60-15 tires are recommended with 15x7” wheels but will require modifications for correct fit. For 1967-1968, 225/60-15 tires are recommended with 15x7” wheels. For 1969-1973, 235/60-15 tires are recommended with 15x7” wheels.
- These wheels require the use of extended thread lug nuts (WHLLN119) or extended wheel studs.

Tech Tip: Even though these wheels are intended to fit most 4-lug 1965-1973 Mustangs with the original 4” x 4.5" bolt pattern and 4.25" of backspacing. It is a general rule of thumb, you should always measure and verify clearance before ordering aftermarket wheels, as modifications may, or will be necessary for fitment on your classic Mustang.

*Lug nuts for installation are not included. They must be purchased separately.
*Legendary Wheel Co. “L” logo Center caps are included with the Legendary Wheel Co. wheels. Spinner style center caps are sold separately.