Maximum Motorsports K-Member Package With 10" 275lb Springs For Use With Koni Struts Mustang 1996-2004

The Maximum Motorsports K-Member Package completely replaces all the factory suspension components on the front end of your 1996-2004 Mustang. This will improve suspension geometry while also reducing the front end weight (40lbs. + Over Stock Components). Factory suspension components are heavy and aren't set up for performance. Replace these bulky, inefficient components with these lightweight tubular components, optimized for handling!

Features and Benefits:
- Fits 1996-2004 Mustangs
- Improved Suspension Geometry
- Adjustable Ride Height
- Proudly Manufactured in the USA!
- Black Powder Coated Finish
- Weight Savings (40lbs.-Plus Over Stock Components)
- Includes Coil Over Conversion Kit for use with Koni Struts
- High Quality Maximum Motorsports Engineering

The new front K-Member and lower control arms feature high quality tubular steel construction. Motor mounts on the K-Member can be mounted in the factory location or move the engine rearward one inch. The Front Lower Control Arm Mounts are shifted 0.75” straight forward, to increase positive caster and move the center of gravity slightly rearward for improved weight distribution. The stiff K-Member design will prevent flexing, which will improve steering response and handling.  Maximum Motorsports gussets the critical areas preventing fracturing.

Maximum Motorsports assembles control arms with OEM low-friction ball joints. Their Front Lower Control Arms will improve steering response and suffer from less deflection with Urethane pivot bushings. The Non-Offset Front Lower Control Arms will keep the front wheels in the factory location.

The Front Coilover Kit includes Threaded Sleeves that will only work on the Koni Front Struts. The Maximum Motorsports Coilover Kit comes with 10” Springs with a Spring Rate of 275lbs. The 10" 275lb Springs are great for Mustangs that see heavy street and entry-level performance handling at the track. This kit allows you to adjust the ride height so you can dial in your stance easily with the included tool. Maximum Motorsports includes all the necessary components to completely install Front Coil Overs on your 1996-2004 Mustangs.

Please Note: The Koni Struts are NOT included with this Maximum Motorsports K-Member Package (KONI17).

This Kit Includes:
- K-Member
- K-Member 2-Point Brace
- Non-Offset Front Lower Control Arms
- Bumpsteer Kit
- Caster Camber Plates
- Aluminum Steering Rack Bushings
- Short Sway Bar End Links
- Urethane Sway Bar Bushings
- Coilover Kit (10-Inch Springs with a 275lbs. Spring Rate) (For use with Koni Struts)

Vehicle Fitment:
- 1996-2004 Mustang

ATTENTION: Due to increased demand for this hand built product, this part may take up to eight weeks for shipment.