McLeod Clutch Kit 11 Super Street Pro 1-1/8" x 26 Spline With Manual Transmission Mustang GT 2001-2004/ SVT Cobras 1999-2004/ Mach 1s 2003-2004

Install an upgraded clutch capable of taking the street or the track with this McLeod Super Street Pro 1-1/8” X 26 Spline 11” Clutch Kit for 2001-2004 GT Mustangs with a Manual Transmission, 1999-2004 SVT Cobras and 2003-2004 Mach 1’s. This kit is recommended by McLeod for those with vehicles up to 550 hp and equipped with moderate engine mods as well as street tires. Each Super Street Kit is SFI approved and comes complete with a high clamp load pressure plate, a dual-faced organic and metallic disc to ensure you experience fluid engagement and a new caliber of holding power.

Specifications:
- Input Shaft / Spline: 1-1/8” x 26
- Disc Diameter: 11”
- Disc Material: Organic/Ceramic
- Disc Style: Full Face
- Hub Style: Sprung
- Pressure Plate Style: Diaphragm
- Horsepower Rating: 550
- Clutch Usage: Street/Track
- Number of Discs: Single

The McLeod Super Street Pro is an ideal upgrade for your 'stang due to the street-friendly yet track proven operation seen in every order. McLeod secures every purchase comes complete with an alignment tool and standard throwout bearing, for your convenience. Take your drive to the next level and pick up a McLeod Super Street Pro 1-1/8” X 26 Spline 11” Clutch Kit from CJ Pony Parts today!

Vehicle Fitment:
- 2001-2004 GT Mustangs
- 1999-2004 SVT Cobra Mustangs
- 2003-2004 Mach 1 Mustangs

Please Note: This Clutch Kit does NOT include a Flywheel or any replacement Hardware for installation.

Tech Tip: This Clutch Kit is designed for use with 26 spline aftermarket transmissions such as the Tremec TKO and T56 or factory transmissions equipped with a 25 spline conversion.
Tech Tip 2: In 2001, Ford made the Mustang GT available with two different transmissions. To find out which style transmission you have, check the data sticker located on the driver side door jamb. A "K" means the car came with a TR3650 and a "6" indicates a T45. This clutch kit works with the TR3650.

*Depending on your application, please make sure you are using the correct tooth and balance flywheel during the installation this new McLeod Clutch Kit.
*Will not fit V6 Mustangs.