National Input Shaft Seal 4-Speed Toploader Small Input Shaft 1965-1973
National:
480210
National Input Shaft Seal 4-Speed Toploader Small Input Shaft is rated
out of
5 by
2.
Highlights
- Eliminates Bore Leakage
- Patented Lay-Down Sealing Lip
- For 4-Speed Toploader
- Fits Small Input Shaft
MSRP $15.99
$14.39 You save 10%
National Input Shaft Seal for 4-Speed Toploaders with a Small Input Shaft.
This is the seal at the front case of the transmission around the input shaft behind the throw out bearing retainer.
Eliminates bore leakage using a nitril seal with a proprietary RediCoat sealant. Patented lay-down sealing lip design ensures long life in spite of extreme temperatures, shaft imperfections, shaft/bore misalignment and excessive shaft thrust or movement.
Dimensions:
-Shaft Size - 1.062"
-Housing Bore - 1.499"
-Outer Diameter - 1.503"
-Width - 0.312"
*This seal is for a 1-1/16" input shaft.
Eliminates bore leakage using a nitril seal with a proprietary RediCoat sealant. Patented lay-down sealing lip design ensures long life in spite of extreme temperatures, shaft imperfections, shaft/bore misalignment and excessive shaft thrust or movement.
Dimensions:
-Shaft Size - 1.062"
-Housing Bore - 1.499"
-Outer Diameter - 1.503"
-Width - 0.312"
*This seal is for a 1-1/16" input shaft.
California Residents: Proposition 65 Warning
Rated 1 out of
5
by
19flash32 from
Uh-oh..
I bought both the seal & the bearing retainer. The seal is too small (by 1/16") for the retainer. CJ did not offer another seal. I have had to find an appropriate seal on my own.
Date published: 2017-04-09
Rated 1 out of
5
by
Dave from
The correct seal numbers
This is the incorrect seal for the small toploader input shaft. The correct seal numbers are, National 482208, Better yet SKF 11123.
Date published: 2020-01-30
CJ's Picks
Might Also Like
