Power Window Kit With Crank Handle Switches Front Door Windows Mustang 1971-1973

CJ's Part Number:


  • AC Delco Window Motors
  • 2 Crank Style Handle Switches
  • New Power Regulators
  • Labeled Wiring Harness

Front Door Power Window Kit with Crank Handle Switches for 1971, 1972 and 1973 Mustangs.

The Front Door Power Window Kit with Crank Handle Switches for 1971-1973 Mustangs comes with everything you need to convert from those tiring manual crank windows to a custom power window setup with power crank handle switches that reuse your original window cranks handles. The kit comes with new power regulators featuring AC Delco motors for the front door windows, power crank handle switches for original window cranks, a complete and labeled wiring harness, as well as conduit to protect the wires traveling through the doors.

Features and Benefits:
- Power Window Operation Upgrade
- AC Delco Motor Regulators
- Protective Conduit Wiring Harnesses with Labeling
- Made in the USA
- Simple Bolt-On Installation

You can count on these new power window regulators to last because they are built right here in the USA. Constructed of 1018 cold roll steel with bronze Oilite thrust bearings at all the pivot points and feature treated gear plates for longer teeth life. The new power window regulators are designed to bolt directly into the original mounting holes with little to no modifications and will use the original glass channels.

This kit includes power crank handle switches that are controlled by pushing down on the crank handle to lower the window and pulling up on the crank handle to raise the window. These crank handle switches mount behind the door panels and allow the use of original window crank handles. The original window cranks mount directly on to the new power crank handle switches the same way they would mount on to the factory manual window regulators. There is no right or wrong position for the window cranks once installed on the crank handle switches; placement is entirely up to you.

Kit Includes:
- New Power Regulators (2)
- New AC Delco Power Window Motors (2)
- Power Crank Handle Switches (2)
- Complete and Labeled Wiring Harness (1)
- Conduit (2)


The wiring harness comes with all the wires labeled for correct positioning and is fused to allow operation of the power windows without the engine running. The black wire is the ground and should be attached to clean metal to ensure a proper ground. The red (orange) wire is the 12V hot feed.

*For front door windows only.
*Not for use on Mustangs with factory power windows.

Please Note: We recommend using these crank handle style switches so you are not left with a hole in your door panels where the factory regulator would come through.

California Residents: Proposition 65 Warning

Installation Difficulty


Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account