Powermaster Alternator 200 Amp GT 1999-2004

CJ's Part Number:
100% of 100
Only %1 left

Powermaster 200 AMP Alternator for all 1999, 2000, 2001, 2002, 2003 and 2004 GT Mustangs.

Are you looking to replace your underpowered original alternator on your New Edge GT Mustang? If so you might be interested in replacing it with this 200 AMP Alternator from Powermaster. This Powermaster 200 AMP Alternator is a performance upgrade for all 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs. The Powermaster Alternator is manufactured for Mustang owners that have added aftermarket electrical components.

- Fits all 1999-2004 GT Mustangs
- High Output, with Excellent Idle Performance
- Available in Several Different Finishes
- Hand Wound, Custom Designed Stators
- OEM Wiring Plug
- Heavy Duty Regulators and Rectifiers
- Gold-Plated Battery Post
- Dual Internal Fans
- Includes 6 Rib Pulley
- 125 AMPS @ 2400 RPM; Max. Alt. RPM: 18,000
- In House Testing with Proof Tag

Please Note: This Powermaster 200 AMP Alternator will not work on 2001 Bullitt Mustangs.

The Powermaster Alternator is a high output unit that features excellent idle performance. The custom designed stators are hand wound for the best performance. Powermaster uses the correct wiring plug, this makes installation quick and easy for all skill set mechanics. Each Powermaster Alternator is tested in house and will include a proof tag. The proof tag is like a dyno sheet that tells you all about the Alternator.

Powermaster offers every one of their customers a variety of high-performance starters and alternators for the Ford Mustang. Powermaster has a wide range of size and performance level choices to ensure that every customer will find a piece of equipment that will fit just about any Mustang application that could be needed. Powermaster Performance equipment also comes in a range of finish options. Browse through CJ Pony Parts' inventory below and find the perfect equipment for your Mustang today!

Purchase a new Powermaster 200 AMP Alternator for your 1999, 2000, 2001, 2002, 2003 or 2004 GT Mustang from CJ Pony Parts today!

Installation Videos

Video Transcript

Bill: We have a special guest in the studio today. Brady, the Sales Manager from Powermaster, and he's here to tell us a little bit about their products. Brady, thanks for coming.

Brady: Thanks for having me, Bill.

Bill: What can you tell me about Powermaster?

Brady: Well, Powermaster Performance was started in 1981 making some OE parts. We do work for Richard Petty Driving School, Grave Digger monster trucks. In 1992, the Powermaster brand was started. What we do is high performance starters and alternators. We have a one-year warranty on our products and 90 days on some of the race stuff. We do a full refurb program for anybody that runs into a little trouble with an install or damages some products on a race vehicle.

We have everything from stock replacement alternators and starters all the way up to high performance gear reduction for engines up to 18 to one compression, alternators up to 200 and higher amperage. Basically anything for the street, strip and hot rod type applications.

Bill: Where are your products made at?

Brady: Everything we do is made in our 150,000-square foot plant in West Chicago, Illinois. We've been there since 1981 and we're not going anywhere.

Bill: I'm familiar with your starters and alternators, but I wasn't aware you guys made a generator.

Brady: Well, Bill, we actually don't. This is an alternator that just looks like a generator. This is for guys that are looking for a little bit higher amperage than the factory piece. We dyno test every starter and alternator that leaves the plant. Every alternator gets our proof of performance tag.

As you can see, this one did 90 amps at the top end, 72 at idle, which is well over three times the output a factory generator would've done. That's in half the weight of a factory generator package.

Bill: What can you tell me about this generator you brought with you?

Brady: What we brought with us today was the 200-amp in a natural finish here for upgrade on later model vehicles. We got a hundred amp one wire for a serpentine setup in a black finish. We also brought a chrome finish for the earlier models with the v-belt on it. That's again a one wire hundred amp hookup. Those come with the mounting hardware so that they'll bolt right into your Mustang. We offer anything from a stock replacement 60-amp externally regulated all the way up to that 200-amp of direct replacement.

Bill: They're all available in three finishes?

Brady: All available in not just these three finishes, but we also offer polished and a brand new satin finish that we're working on now.

Bill: Brady, I know starters are a big part of your business at Powermaster. Want can you tell us about this one you brought with you today?

Brady: This is our XS torque 200-foot pound starter. It's got a fully aluminum-encased solenoid and armature housing. What that does it helps keep heat soak down. The heat's going to dissipate right out of the starter motor during cranking. What it also has is our fully-adjustable intra-clock style feature. This starter can be rotated 360 degrees to clear headers and kick out an oil pan or really any obstacle you may have in the way, all in a package that will turn an engine up to 18 to one compression with no problems.

Bill: The Powermaster has taken a part that most people view as a replacement item and made it into a true performance necessity.

Brady: That's right. We've been making starters and alternators for your Mustang for over thirty years right here in the U.S.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account