Roofrail Foam Adhesive Backed 12’ 1965-1973

CJ's Part Number:
RF
Roofrail Foam Adhesive Backed 12’ 1965-1973 is rated 4.4 out of 5 by 9.
  • y_2019, m_10, d_20, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_RF, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 38.67ms
  • REVIEWS, PRODUCT

Highlights

  • Adhesive Backed
  • 12Ft Roll
  • Sold Individually
  • Fits 1965-1973 Mustang
MSRP $14.99
$12.99
You save 13%

Single 12 Foot Section of Roofrail Adhesive Backed Foam for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.

This long-lasting roofrail foam will work on any 1967-1968 Coupe or Fastback Mustang. Featuring premium adhesive backing that's durable to stay strong for many years to come. Showcasing a 12' length section of roofrail foam that's enough to meet the needs of your your Mustang restoration, and only one roll is required for a clean and simple install. Purchase yourself this dense foam and help seal the gap between the body of your Mustang and the roofrail channel.

Features:
- 1/8” thick x 1” width x 12’ length
- Adhesive Backing
- Sold individually

Applications:
1967-1968 Mustang CP/FB

Purchase a new Single 12 Foot Section of Roofrail Adhesive Backed Foam for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Mustang years:

Rated 4 out of 5 by from Fit perfectly, wish it'd come with more Fits to the roof channel perfectly, and most importantly, it's the right thickness. Best to buy two rolls of these though, as you'll need an extra four feet or so to finish the job. It's pricey for the extra footage, but you can always use the extra on your interior panels to prevent small rattles.
Date published: 2015-10-06
Rated 4 out of 5 by from Little pricey for foam, but fit right and worked I decided to pull the trigger and get these to make sure I had the right size for the back of the weather stripping track on my '70 Mach 1 when I reinstalled it. The fit was just right and it worked well.
Date published: 2015-06-24
Rated 5 out of 5 by from roof rail seal Worked out great needed an extra layer to add to the roof rail for a good window seal
Date published: 2016-03-04
Rated 5 out of 5 by from Roofrail foam Worked out very nice. One roll is enough for a 65 fastback. Had about a foot spare. However, I think the coupe needs 2 rolls, 13ft total.
Date published: 2017-06-02
Rated 5 out of 5 by from good stuff just like ford used . just peal and stick its not all that tricky
Date published: 2017-11-14
Rated 5 out of 5 by from Easy to work with. Already put on the car and really does a good job of sealing.
Date published: 2017-05-10
Rated 4 out of 5 by from Fits as stock Fits well. easy to apply. As far as the first generation hardtop goes, one roll would do both sides, and even better if it's one continuous piece.
Date published: 2018-05-31
Rated 3 out of 5 by from Only need one They tell you you need two I did both of mine with one glade I brought two
Date published: 2019-02-11
  • y_2019, m_10, d_20, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_RF, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.14ms
  • REVIEWS, PRODUCT

Is it better to install this before or after installing the roof rail weather strip?

Asked by: Andi
This installs on the backside of the roof rail weatherstrip channel.
Answered by: rk cjpp
Date published: 2019-07-17

Is this part in stock ?

Asked by: Terry
At this time it is in stock.
Answered by: rk cjpp
Date published: 2019-02-08

After reading all the Q's and A's, I still don't know where the roof rail weatherstrip goes. Can you clear this up for me?

Asked by: Chawkfan
This goes between the stainless trim that surrounds the door and quarter window opening and the body.
Answered by: rk cjpp
Date published: 2018-07-09

If you already have roofrail weatherstrip, then where does the foam adhesive go. I can't see any space for it

Asked by: rigatoni65
The roofrail foam is located between the roofrail weatherstrip channel and the body. The adhesive side of the roofrail foam should be attached to the roofrail weatherstrip channel.
Answered by: CJ Pony Parts
Date published: 2018-05-24

what is the dimension of the roofrail adhesive backed foam weatherstrip

Asked by: scottstuff
Unfortunately, that data is not available.
Answered by: CJ Pony Parts
Date published: 2019-01-09
  • y_2019, m_10, d_20, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_RF, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 32.19ms
  • QUESTIONS, PRODUCT