Voxx B/G Works Highboy Wheel 5-Lug Polished Mustang 1965-1973

This Highboy wheel by Voxx offers a clean, traditional hot rod look that adds a resto but modern look to your classic Mustang. These 17-inch Highboy Wheels will fit all 1965-1973 5-lug Ford Mustangs and are available individually or as a set of four in square 17x7” or 17x8” or staggered 17x7”/17x8” configurations.

Wheel Specifications:
- Sizes: 17x7” / 17x8”
- Lug Pattern: 5 x 4.5 (5 x 114.3 mm)
- Offset: 6mm for 17x7” / 0 mm for 17x8”
- Back Spacing: 4.25 inches for 17x7” / 4.5 inches for 18x8”
- Hub Bore: 3.07” (78.1 mm)

The inside of the wheel features sleek oval cuts that follow the circumference of the wheel. A classic 5-spoke design and a polished exterior finish perfectly complement any Mustang’s color base. Clearance has been included to allow modern brakes to fit. The one-piece construction ensures that each wheel is identical to the other while keeping weight as low as possible.

*These wheels are manufactured with a dual lug pattern 5x4.5” and 5x5”

Tech Tip: Even though these wheels are intended to fit 5-lug 1965-1973 Mustangs with the original 5 x 4.5" bolt pattern and 4.25" of backspacing. It is a general rule of thumb, you should always measure and verify clearance before ordering aftermarket wheels, as modifications may be necessary for fitment on your classic Mustang.

Additional Notes:
- We do NOT recommend 8” wide wheels to be installed on the front of the 1965-1966 Mustang due to clearance issues.
- Requires open-ended lug nuts. We recommend P/N: WHLLN100.