Wilwood Rear Disc Brake Kit DynaPro With 11" Drilled/Slotted Rotors For 2.5" Axle Offset 8"/9" Small Bearing 1965-1973
Wilwood DynaPro Rear Disc Brake Kit with 11" Drilled and Slotted Rotors for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 2.5" Axle Offset and 8" or 9" Small Bearing Rear End.
If you're looking for a complete rear disc brake solution for your 1965-1973 Mustang, you should definitely take a closer look at this Rear Disc Brake Kit from Wilwood. It'll give you optimized and balanced braking no matter if your Pony is your daily driver, a show car or for racing!
Features & Benefits:
- Allows 14" to 15" Rim Applications
- Forged Billet DynaPro Low-Profile 4-Piston Calipers, 11" One-Piece Hat and Rotor Assemblies and High-Friction Pads
- Optimized and Balanced Braking for Custom Performance, Street/Strip and Show Mustangs
- Hidden Internal Shoe System for Clean Installation and Excellent Holding Power for Parking
- Optional Black or Red Caliper Finishes
This Wilwood DynaPro Rear Disc Brake Kit with 11" Drilled and Slotted Rotors features forged billet DynaPro low-profile 4-piston calipers, an 11" one-piece hat and rotor assemblies and high-friction pads. All of these parts combine to give you an improved rear disc brake system in your Mustang and allow for 14" to 15" rim applications! The hidden internal shoe system means you can expect a clean install, not to mention excellent holding power for when your Pony is parked. You can choose from either black or red caliper finishes, which gives you yet another way to personalize your new rear disc brake kit!
Rear End Axle: Small Ford
Axle Offset: 2.5"
Mount Type: Lug
Caliper Type: 4
Rotor Diameter: 11"
Wheel Diameter: 14"
Replacing brakes are a necessity of owning any vehicle. However, the brakes on your Mustang don't need to wear out as fast when you install well engineered, high performance braking components, like those that are available from Wilwood!
Order a Wilwood DynaPro Rear Disc Brake Kit with 11" Drilled and Slotted Rotors for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a 2.5" Axle Offset and 8" or 9" Small Bearing Rear End from CJ Pony Parts today!
Advanced skill is required for this installation.