Holley Carburetor 600 CFM Double Pumper 4-Barrel Manual Choke Polished
Holley Polished Double Pumper 600 CFM 4-Barrel Carburetor with Manual Choke.
Are you looking for a high performance carburetor for your vehicle? If so you might want to consider this high quality carburetor from Holley. This Double Pumper Carburetor is designed to be a direct replacement for all engines with a square bore intake manifold. Holley highly recommends you use this carburetor on lightweight vehicles with manual transmissions or automatics with high stall and low gearing.
Features:
- Polished Finish
- Easy Installation
- Manual Choke
- Mechanical Secondaries
- Dual Accelerator Pumps
- Dual Feed Fuel Inlets
- 100% Wet-flow Tested
Holley Double Pump Specs:
- Barrels: 4
- Color: Polished Finish
- Boost: Straight
- CFM: 600
- Choke: Manual
- Emission Code: 3
- Fuel Type: Gasoline
- Fuel Inlet: Dual
- Material: Zinc
- Model: 4150
- Secondaries: Mechanical
- Supercharged Application: No
- Throttle Bore: 1.688 inch
- Vacuum Ports: 1 timed (spark) port, 1 full, and 1 PCV port
The carburetor on your vehicle is a part that you rely upon to work. Without it, your vehicle isn't going anywhere. That's why you want to make sure you get a high quality part when you replace or upgrade your carburetor, and no carburetor is going to have higher quality than the products from Holley. With more than a century of experience, and dozens of products available from CJ Pony Parts, you know you're getting the best.
Purchase a new Holley Polished Double Pumper 600 CFM 4-Barrel Carburetor with Manual Choke from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Engine, Mustang Carburetors, Ford Bronco Parts, Bronco Engine
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
Installation Videos
Video Transcript
All of the Holley carburetors are going to be available in the standard finish shown here, the polished version, or a fully polished aluminum casing with your choice with electric or manual choke. No matter what kind of horsepower your Mustang is making, here at CJ Pony Parts we have the perfect Holley carburetor for your application.
