Holley Carburetor 750 CFM Double Pumper 4-Barrel Manual Choke Polished Finish
Holley Polished Finish Double Pumper 750 CFM 4-Barrel Carburetor with Manual Choke.
Are you looking to replace your factory carburetor on your Ford Engine? If so you might be interested in this high performance carburetor from Holley. The Holley Performance carburetor is a direct replacement for all Ford Engines with the correct square bore intake manifold. This Holley carburetor is calibrated for street and strip use right out of the box.
Carburetor Specs:
- Barrels: 4
- Color: Polished Finish
- Boost: Down Leg
- CFM: 750
- Choke: Manual
- Emission Code: 3
- Fuel Type: Gasoline
- Fuel Inlet: Dual
- Material: Zinc
- Model: 4150
- Secondaries: Mechanical
- Supercharged Application: No
- Throttle Bore: 1.688 inch
- Vacuum Ports: 1 timed (spark) port, 1 full, and 1 PCV port
Features:
- Polished Finish
- Manual Choke
- Mechanical Secondaries
- Dual Accelerator Pumps
- Dual Feed Fuel Inlets
- 100% Wet-flow Tested
The carburetor on your Ford is a part that you rely upon to work. Without it, your Ford isn't going anywhere. That's why you want to make sure you get a high quality part when you replace or upgrade your carburetor, and no carburetor is going to have higher quality than the products from Holley. With more than a century of experience, and dozens of products available from CJ Pony Parts, you know you're getting the best.
Purchase a new Holley Polished Finish Double Pumper 750 CFM 4-Barrel Carburetor with Manual Choke from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Engine, Mustang Carburetors, Ford Bronco Parts, Bronco Engine
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
Installation Videos
Video Transcript
All of the Holley carburetors are going to be available in the standard finish shown here, the polished version, or a fully polished aluminum casing with your choice with electric or manual choke. No matter what kind of horsepower your Mustang is making, here at CJ Pony Parts we have the perfect Holley carburetor for your application.
