COMP Cams Magnum 286HR Camshaft with a 3000 to 6500 RPM Range for 1985-1995 Mustangs with Carbureted 5.0L Engines.Available with camshaft only, camshaft and lifers, small kit or complete kit.
This hydraulic roller camshaft will fit Ford 5.0 Liter engines from 1985-2001.
Magnum cams generate great high RPM power. The can be used with mild ratio rocker arms and traditional performance valve springs as they are easy on valve train parts. These camshafts like compression ratios of 9.5:1 and higher. A torque converter and gear change is really needed. The larger Magnum cams are a little lazy at low RPMs.
This camshaft is best for street/strip applications. A 5-speed should have 4.10 or lower gears with higher compression, an aftermarket intake, and exhaust. A higher stall torque converter is required.
-RPM Range: 3000 to 6500
-Valve Timing: 0.006
-Lobe separation (degrees): 110
-Intake Centerline (degrees): 106
-Valve Lash: Hydraulic
-Duration: Intake 286/ Exhaust 286
-Duration @ .050" Lift: Intake 230/ Exhaust 230
-Valve Lift: Intake 0.598/ Exhaust 0.598
-Lobe Lift: Intake 0.373/ Exhaust 0.373
-Camshaft (354508) Only
-Camshaft (354508) and Lifters (LIFTER1)
-Small Kit - Camshaft (355408), Lifters (LIFTER1), Timing Chain Set (2138) and Assembly Lube
-Complete Kit - Everything in Small Kit Plus Valve Springs (98616), Valve Spring Retainers (74016), Locks (61116), and Valve Stem Seals (50316)
You Might Also Like
From:CJ's Low Price:$294.99
CJ's Low Price:$299.99
CJ's Low Price:$199.99
CJ's Low Price:$209.99