Knob For Front Seat Latch Handle 1981-1993

CJ's Part Number: HW2956

Regular Price: $5.55

Special Price $3.89

In StockOrders placed today will ship Monday1408665600
Earn 5 RPM Points What's this?
1408406400 1408665600
On Sale: Interior Sale!
HW2956
HW2956 HW2956_1 HW2956_2 HW2956_3 Play Knob For Front Seat Latch Handle 1981-1993 Video 1

Product Description

Front Seat Latch Handle Knob for 1981-1993 Ford Mustangs.

Located on the front seat back and used to tilt the seat forward, the factory knob's for the front seat latch handles are frequently broken off or go missing over time.

Fortunately, you can now replace a damaged or missing front seat latch handle knob with this exact reproduction molded from black plastic using Ford's original blue prints. Sold individually, each seat requires it's own knob.

Similar Mustang Parts

similar mustang parts More Mustang Seats  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review

Product Video

By Bill Tumas: Although most of us don't use the back seat of our Fox Body Mustang very often, there's nothing worse than going for that seat latch and finding it broken off. It's a very common problem in a Fox Body Mustang, and it's very easy to fix. Today, we're going to replace the latch and the bezel in this 1990 Mustang GT.

This is one of the two ways your seat latch usually breaks. It either comes all the way off, or it snaps in half. In our case, we've got to remove what's left of before we can install the new one. Since we're replacing the bezel at the same time, we can lay our screwdriver against our bezel and carefully pry off the old piece. It sometimes can be a little difficult to get off, depending on how badly broken it is. Now we're going to remove our bezel. We want to keep the screw for our new bezel. We want to make sure these two tabs get behind the upholstery and behind the little metal seat frame here to hold it in place. Now we'll install the knob. We simply line it up with the retaining tabs on there and give it a good push, and it will go into place.

The seat latch itself usually doesn't go bad, so nine times out of ten, it's just the knob that needs to be replaced. Installation is only about a minute or so, so you'll be back on the road in no time.