Maximum Motorsports 6-Point Street/Strip Roll Bar with Standard Door Bars and a Removable Harness Mount for all 1979-1993 Mustang Coupes and Hatchbacks.Increase both safety and the rigidity of your Mustang's chassis with a Maximum Motorsports Street/Strip Roll Bar. This Street/Strip roll bar includes standard style door bars to increase side impact safety. Standard door bars are designed for easy initial installation (no welding), but are not intended to be removed. Street/Strip roll bars are identical to the Drag Race roll bars, except the harness mount tube is removable which is not NHRA or NMRA legal.
Maximum Motorsports manufactures all their Roll Bars from the highest quality materials and hardware. Made of 1-3/4" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing). Contour-hugging 6" x 6" mounting pads with backup plates sandwich the unibody for safe and strong mounting. All hardware is Grade 5 or higher. Maximum Motorsports roll bars are designed to fit with your stock Mustang interior.
The Maximum Motorsports Roll Bars for Mustang coupes and hatchbacks are designed to bolt to the chassis, without welding. The floor pan is sandwiched between the roll bar mounting pads and the back-up plates underneath the floor pan. There is a significant clamping force between the two pads, providing a very secure method of attachment.
All of Maximum Motorsports roll bars are uncoated, bare steel. For a high quality finish, the installer should paint or powder coat the roll bar as part of the installation. Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.
*This roll bar does NOT conform to NHRA and NMRA rules.
Similar Mustang PartsMore Interior
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$184.97