Maximum Motorsports Roll Bar Street/ Strip 6-Point With Standard Door Bars/ Removable Harness Mount Mustang Coupe/ Hatchback 1979-1993
Highlights
- 1-3/4" Diameter Tubing
- 0.134" Wall Dom Tube
- 6" X 6" Mounting Pads
- Made in the USA
Maximum Motorsports 6-Point Street/Strip Roll Bar with Standard Door Bars and a Removable Harness Mount for 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 and 1993 Coupe and Hatchback Mustangs.
Designed by Maximum Motorsports, this 6-Point Street/Strip Roll Bar (MMRB-1.5) will increase the rigidity of your chassis. It is made for 1979-1993 Coupe and Hatchback Mustangs and comes with standard style door bars to increase side-impact safety. Standard door bars are designed for easy initial installation (no welding) but are not intended to be removed. Street/Strip roll bars are identical to the Drag Race roll bars, except the harness mount tube is removable which is not NHRA or NMRA legal.
Maximum Motorsports manufactures all their Roll Bars from the highest quality materials and hardware. Made of 1-3/4" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing). Contour-hugging 6" x 6" mounting pads with backup plates sandwich the unibody for safe and strong mounting. All hardware is Grade 5 or higher. Maximum Motorsports roll bars are designed to fit with your stock Mustang interior.
Features and Benefits:
- Standard-Style Door Bars
- Stiffens Chassis
- Grade 5 or Higher Hardware
- Increases Side-Impact Safety
- 1-3/4" Diameter by 0.134" Wall DOM Tube
The Maximum Motorsports Roll Bars are designed to bolt to the chassis, without welding. The floor pan is sandwiched between the roll bar mounting pads and the back-up plates underneath the floor pan. There is a significant clamping force between the two pads, providing a very secure method of attachment.
All of Maximum Motorsports roll bars are uncoated, bare steel. For a high-quality finish, the installer should paint or powder coat the roll bar as part of the installation. Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.
Please Note: This roll bar does NOT conform to NHRA and NMRA rules.
ATTENTION: Due to increased demand for this hand-built product, this part may take up to eight weeks for shipment.
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Interior, Mustang Roll Bars
Installation Difficulty
Advanced skill is required for this installation.