Maximum Motorsports 6-Point Street/Strip Roll Bar with Removable Swing-Out Door Bars and a Removable Harness Mount for all 1983-1993 Mustang Convertibles.Increase both safety and the rigidity of your Mustang's chassis with a Maximum Motorsports Street/Strip Roll Bar. This Street/Strip roll bar includes removable swing-out style door bars to increase side impact safety. Removable swing-out door bars pivot outward, parallel with the doors, for easy entry. They can also be completely removed from the car in a matter of seconds! Street/Strip roll bars are identical to the Drag Race roll bars, except the harness mount tube is removable which is not NHRA or NMRA legal.
Maximum Motorsports manufactures all their Roll Bars from the highest quality materials and hardware. Made of 1-3/4" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing). Contour-hugging 6" x 6" mounting pads with backup plates sandwich the unibody for safe and strong mounting. All hardware is Grade 5 or higher. Maximum Motorsports roll bars are designed to fit with your stock Mustang interior.
Maximum Motorsports includes reinforcement plates for the convertible chassis. These reinforcements are welded into place behind the rear seat to provide a good structural attachment point for the rear braces. During installation the convertible top can be lowered and stowed, which provides very easy access to protect the interior and complete the required welding. The roll bar bolts into its final position, and can be removed from the car as a complete unit. Although the roll bar does not weld to the chassis you will need to weld the rear supports to the main hoop.
All of Maximum Motorsports roll bars are uncoated, bare steel. For a high quality finish, the installer should paint or powder coat the roll bar as part of the installation. Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.
Please Note: The Maximum Motorsports Roll Bar for Mustang convertibles does require welding to the floor pan. Someone who is a qualified "expert welder" is required for installation of a convertible roll bar.
*This roll bar does NOT conform to NHRA and NMRA rules.
*Roll bars in convertibles will not accommodate a light bar.
*Convertible tonneau covers will not fit after a roll bar installation.
Similar Mustang PartsMore Roll Bars
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$166.99