BMR Panhard Bar Tubular Adjustable With Polyurethane Bushings 2005-2014
CJ's Part Number:
PHB5-V
BMR Tubular Adjustable Panhard Bar with Polyurethane Bushings for all 2005-2014 Mustangs.
The panhard bar is responsible for locating the rear end side-to-side in the chassis. Factory panhard bars are made with small diameter tubing and rubber bushings that allow deflection under load.
BMR panhard bars are all made from larger diameter 1.25", heavy wall DOM tubing and utilize either greaseable polyurethane bushings or HD spherical bearings by QA1. The adjustable versions use left-hand and right-hand thread to allow easy "on-car" adjustment. The CNC machined adjusters are made from 4130 chrom-moly and have rolled threads. All rod end spacers are 304 stainless. You won't find better quality pieces.
By nature, a panhard bar will alter rear end position as ride height changes. This makes it necessary to use an adjustable panhard bar when lowering your vehicle as it allows you to re-center the rear end. Adjustable panhard bars also become a "must-have" part if you are trying to fit the widest tires possible in the wheel well.
Available in your choice of a black hammertone or red powdercoated finish.
BMR panhard bars are all made from larger diameter 1.25", heavy wall DOM tubing and utilize either greaseable polyurethane bushings or HD spherical bearings by QA1. The adjustable versions use left-hand and right-hand thread to allow easy "on-car" adjustment. The CNC machined adjusters are made from 4130 chrom-moly and have rolled threads. All rod end spacers are 304 stainless. You won't find better quality pieces.
By nature, a panhard bar will alter rear end position as ride height changes. This makes it necessary to use an adjustable panhard bar when lowering your vehicle as it allows you to re-center the rear end. Adjustable panhard bars also become a "must-have" part if you are trying to fit the widest tires possible in the wheel well.
Available in your choice of a black hammertone or red powdercoated finish.
Installation Difficulty

Moderate
Intermediate skill is required for this installation.
Installation Videos
Video Transcript
We're here with an Adjustable Panhard Bar from BMR. All 2005 through 2014 Mustang use a panhard bar from the factory. When lowering your Mustang, because the panhard bar mount side to side, it's going to offset your rear suspension. Adjustable bars just one from BMR will line up your track properly. It features a black hammer-tone finish. It's also available in red. It comes with polyurethane greasable bushings and CNC-adjusters for on-car adjustment.
All BMR Panhard Bar use 1.25", heavy weld DOM tubing. This particular model with the polyurethane bushings is designed more for street use. Looking for a competition use? We offer a rod end version as well. Anytime you're lowering mustang, you want to go with the panhard bar that's adjustable to make sure you're track is set properly.
All BMR Panhard Bar use 1.25", heavy weld DOM tubing. This particular model with the polyurethane bushings is designed more for street use. Looking for a competition use? We offer a rod end version as well. Anytime you're lowering mustang, you want to go with the panhard bar that's adjustable to make sure you're track is set properly.
Installation Instructions
Write Your Own Review
CJ's Picks