BMR Rear Lower Control Arm Relocation Bracket Pair 2005-2014
CJ's Part Number:
CRB-V
Only %1 left
Product Description
Pair of BMR Rear Lower Control Arm Relocation Brackets for all 2005-2014 Mustangs.
A vehicles "Instant Center" determines it's ability to transfer weight properly upon acceleration. The angle of the upper and lower control arms produces an intersect point that initiates this weight transfer. With fixed control arm mounting points, it is not possible to tune this instant center position in the chassis.
These control arm relocation brackets provide additional rear mounting holes that allow you to alter the instant center by varying the control arm angles. This mod is recommended for any type of racing and should also be performed if the vehicle is lowered to correct the rear suspension geometry. Mounting hardware included.
Available in a durable black hammertone or red powdercoat finish.
Please Note: It is necessary to weld the brackets in place if the vehicle will be drag raced.
*These brackets, in conjunction with BMR tubular control arms, have produced 1.33 second, 60 foot times on the strip!
These control arm relocation brackets provide additional rear mounting holes that allow you to alter the instant center by varying the control arm angles. This mod is recommended for any type of racing and should also be performed if the vehicle is lowered to correct the rear suspension geometry. Mounting hardware included.
Available in a durable black hammertone or red powdercoat finish.
Please Note: It is necessary to weld the brackets in place if the vehicle will be drag raced.
*These brackets, in conjunction with BMR tubular control arms, have produced 1.33 second, 60 foot times on the strip!
Related Categories: Mustang Suspension, Mustang Rear Control Arms
Installation & Fitment
Installation Difficulty
Moderate
Intermediate skill is required for this installation.
Installation Videos
Installation Instructions
Questions & Answers
Reviews 6
Write Your Own Review