Centerforce Clutches Dual Friction Clutch Friction Disc 10.4” Mustang 5.0L 1986-1993/ GT 1994-2001/ Cobra 1993-1998
Highlights
- 1-1/16 x 10-Spline Input Shaft
- Single Sprung Hub Disc
- Organic/Carbon Comp. Material
- Full & Segment. Frict. Facings
Centerforce Clutches Dual Friction 10.4” Clutch Friction Disc for 1986, 1987, 1988, 1989, 1990, 1991, 1992, and 1993 5.0L Mustangs; 1994, 1995, 1996, 1997, 1998, 1999, 2000, and 2001 GT Mustangs; 1993, 1994, 1995, and 1996 Cobra Mustangs.
Confidently take your 1986-2001 Mustang with a 1-1/16" x 10-spline input shaft to the tracks using the Centerforce Clutches Dual Friction 10.4” Clutch Friction Disc (DF381021)! Meticulously engineered to competition standards, the disc distributes pressure plate clamp force over its 360-degree friction facing. The other side then concentrates the clamping pressure, increasing clutch holding capacity at the same time thanks to its segmented organic friction design. This helps bring out the best performance in stock engines or Mustangs with mild power increases from bolt-on mods, making for a simple and easy upgrade!
Features and Benefits:
- 1-1/16" x 10-Spline Input Shaft
- 10.4” (264.2mm) Diameter
- Direct Fit Upgrade
- Single Sprung Hub Disc
- Organic/Carbon Composite Material
- Full & Segmented Friction Facings
- Concentrated Clamping Pressure
- Increased Clutch Holding Capacity
- Weighs 4.49 lbs
Vehicle Fitment:
- 1986-1993 5.0L Mustang
- 1994-2001 GT Mustang
- 1993-1998 Cobra Mustang
Tech Tip: These discs work best in correspondence with a Centerforce Dual Friction pressure plate.
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Transmission, Restomod Parts, Restomod Transmission
Installation Difficulty
Intermediate skill is required for this installation.
