COMP Cams Timing Chain Set High Energy 289/302/351W 1965-1972
COMP Cams Timing Chain Set High Energy 289/302/351W 1965-1972 is rated out of 5 by 5.
- Cast Iron Construction
- Stock Replacement
- Fits 289/302/351W Engines
- Exceptional Durability
You save $0.74
COMP Cams High Energy Timing Chain Set for all 1965, 1966, 1967, 1968, 1969, 1970, 1971 and 1972 Mustangs with a 289, 302 or 351W Engine.When the time comes to rebuild or repair your Mustang’s 289, 302 or 351W engine, the first place you should turn for cam shafts, timing chains or complete camshaft sets, is COMP Cams. This COMP Cams High Energy Timing Chain Set for all 1965, 1966, 1967, 1968, 1969, 1970, 1971 and 1972 Mustangs with a 289, 302 or 351W Engine is an ideal choice as a stock replacement or in a semi aggressive performance application. Pick yours up at CJ Pony Parts today and you’ll have your engine timed perfectly and running as good as new once again!
Features and Benefits:
- Precision Cast Iron Camshaft and Crank Gear Sprockets
- Premium Quality Fabrication
- Exceptional Durability
- Ideal Stock Replacement
- Fits Any 289, 302 or 351W Engine
- Gears and Chain Included
This timing chain set will synchronize the rotation of the crankshaft and the camshaft so that the engine's valves open and close at the correct times during each cylinder's intake and exhaust strokes. This gets your 1965-1972 Mustang’s 289, 302 or 351W engine performing at the highest, most efficient levels possible. This High Energy Timing Chain Set from COMP Cams exceeds OE specifications and provides significantly increased durability and reliability. This timing chain set is dynamically balanced for a smooth and efficient operation in your prized pony!
If you're doing serious engine modifications or repairs, you might need to replace the valve train and camshafts to get the maximum available power and efficiency. When looking for these replacement parts, there really is only one brand that offers the most horsepower, reliability and gas mileage. That brand, is COMP Cams. CJ Pony Parts offers hundreds of COMP Cam parts, fitting any year and model Mustang, so you can easily find the parts you need and place your order any time!
Rated 5 out of 5 by Keith K from Heavy Duty I replaced the original timing chain and gears with this set. The original main sprocket had fiber teeth and appeared to be a bit flimsy compared to this heavy duty set. Installation was very easy and straightforward. The engine started right after assembly, and idles well.
Date published: 2018-02-27
Rated 5 out of 5 by Dennis B from Easy install Lined up perfectly on my 68 302 block, installed new timing cover, water pump and car fired right up. Set timing and car runs smooth.
Date published: 2017-06-12
Rated 5 out of 5 by mannyd from Perfect match Very easy install just remove old timing chain with dots lined up and install new one. Fired up first turn.
Date published: 2016-04-28
Rated 5 out of 5 by bullitproof306 from great timing set I have never had any problems with comp cam part and i would order again
Date published: 2015-04-28
Rated 5 out of 5 by Weld 63 from Quality piece Perfect fit and was delivered quickly. It was packaged very well
Date published: 2018-08-12
Would I need to reuse my old crankshaft oil slinger or is it not required for this set
You would reuse any parts that are not included per the instructions.
Date published: 2019-08-09
will this kit fit my 1971 mustang with 302 engine ? the old one is not the same in the center of it
Yes this is listed as fitting your application.
Date published: 2017-02-15
a previous owner installed a 302 in my 69 mustang coupe. how do i determine the year of this engine
There should be a part number found above the starter.
Date published: 2016-08-11
Hi. Will this kit work fine with a stock 289 motor, stock camshaft,etc. Thanks
Yes this will work fine.
Date published: 2019-04-04
Does it come with new crank seal and timing cover gaskets ?
Seals and gaskets are NOT included.
Date published: 2018-03-09