Edelbrock Cylinder Head Aluminum Performer RPM For Hydraulic Flat Tappet Cam 390/427/428

Edelbrock:
60069
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 16ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • High Performance Upgrade
  • Excellent Flow For Street
  • Sold Individually
  • Fits 390/427/428 Engines
$739.50

Edelbrock Performer RPM Aluminum Cylinder Head for 390, 427 and 428 Engines with a Hydraulic Flat Tappet Cam.

Are you looking to add some performance to your 390, 427 or 428 Engine? If you are you might want to check out this Aluminum Cylinder Head from Edelbrock. This Edelbrock cylinder head is a direct replacement for all 390, 427 and 428 Engines with a Hydraulic Flat Tappet Cam. Edelbrock manufactures this cylinder head out of a solid piece of aluminum.

This Edelbrock cylinder head features 428 Cobra Jet-sized valves, this helps with ideal flow for street able horsepower and torque. Due to the valve springs this aluminum cylinder head from Edelbrock is designed to be used with a hydraulic flat tappet cam. The Manganese Bronze alloy can operate under very high loads and speeds so that is why Edelbrock uses it for the valve guides.

Performer Cylinder Head Features:
- Fits 390, 427 and 428 Engines
- High Performance Upgrade
- Excellent Flow for Street able Power
- Sold Individually

The Edelbrock Performer RPM cylinder head features lightweight aluminum 170cc intake and 125cc exhaust valves with 72cc combustion chambers and 76cc exhaust ports. Edelbrock uses a deck thickness of 5/8" this will help with the increased cylinder pressure caused from the new performer RPM cylinder head. The Cylinder head from Edelbrock are 50 State Legal so no need to worry when you get your Ford emission tested.

Cylinder Head Specs:
Combustion Chamber Volume: 72cc / 76cc
Intake Runner Volume: 170cc
Exhaust Runner Volume: 125cc
Intake Valve Diameter: 2.09"
Exhaust Valve Diameter: 1.66"
Valve Stem Diameter: 3/8"
Valve Guides: Manganese Bronze
Deck Thickness: 5/8"
Valve Spring Diameter: 1.55"
Valve Spring Maximum Lift: .600"
Rocker Stud: N/A
Guide Plate: N/A
Pushrod Diameter: 3/8"
Valve Angle: 13°
Exhaust Port Location: Stock
Spark Plug Fitment: 14mm x 3/4 reach, Gasket Seat

Please Note: This Performer RPM Cylinder Head is Sold individually, two are required per 390, 427 and 428 Engine.

If you're looking for more performance from your Big Block Ford, check out Edelbrock, who is one of the industry leaders with parts for Ford Vehicle and more than 75 years of experience. Carburetors, exhausts, intake manifolds, and superchargers are just a few of the things that Edelbrock provides, giving you many ways that you can get the most out of your engine with high quality performance products.

Order a new Edelbrock (60069) Performer RPM Aluminum Cylinder Head for your 390, 427 or 428 Engine with a Hydraulic Flat Tappet Cam from CJ Pony Parts today!

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.74ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

I am putting Edelbrock 60069 aluminum heads on my 67 Fe 390 I have purchased a crane cam part number 343802 will there be any issues with running this cam with these heads I intend on using the original rocker arms and shaft and pedestals also the 6009

Asked by: matthew063
There is absolutely no issue running this camshaft with these Edelbrock cylinder heads, the only problem you will have, if your factory rocker arms are not the adjustable type, you have to adjust lifter pre-load to 1/4 turn past zero lash to properly adjust the rocker arms with the lifters, this can only be done with an adjustable push rod or rocker arms on your factory set-up
Answered by: Edelbrock
Date published: 2017-12-27

I have dual spring valve springs on my heads for my cam can they be used on the new aluminum head 60069 what would I have to do to use these heads with roller rockers and a roller cam

Asked by: matthew063
This will not work with a roller cam.
Answered by: rk cjpp
Date published: 2017-10-25

Approximate cost on freight for 2 heads plus gaskets to post code 2480 lismore  nsw Australia. Regards phil

Asked by: Phil67
To get a shipping quote and total price, add the item(s) to your shopping cart and then proceed to checkout. In checkout, fill out your address info and scroll down to see shipping options and costs to your area including any import taxes and duties.
Answered by: CJPP Dave
Date published: 2017-05-04

will the 428 CJ exhaust fit ?

Asked by: Randallc
YES, it will bolt on
Answered by: Edelbrock
Date published: 2017-04-24

Can I use these heads on a 406 ford FE with mechanical lifters?

Asked by: roger4d
No, please purchase Edelbrock Cylinder Heads # 60065 for use with mechanical solid lifters
Answered by: Edelbrock
Date published: 2017-04-17

so if I purchase these heads do I have to change to adjustable lifters or can I stay with non adjustabe thanks

Asked by: ronneufield
You can use the original rocker arm assembly & push rods, if you do not change the camshaft,
Answered by: rk cjpp
Date published: 2017-03-30

Hi Is this head made for the non adjustable rocker assembly My 390 is non adjustable Also if I can use it can I use the rocker asemly I have on my heads or do I have to buy new ones Thanks Ron

Asked by: ronneufield
YES, you can use the original rocker arm assembly & push rods, if you do not change the camshaft, no issues whatsoever.....
Answered by: Edelbrock
Date published: 2017-03-27

what type and number spark plug too use in this head thanks.

Asked by: fairlane 427
You would need a 14mm x 3/4 reach gasket seat spark plug, like a autolite 3924.
Answered by: rk cjpp
Date published: 2016-08-04
  • y_2019, m_12, d_9, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_EDL60069, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 103.46ms
  • QUESTIONS, PRODUCT
Complete Your Package
Add to Cart