Edelbrock Victor Big Block Ford 460 EFI Intake Manifold
Edelbrock Victor Big Block Ford 460 EFI Intake Manifold
Edelbrock Part # 50665 Victor 460 EFI intake manifold is based on our popular Torker II #5066 for 429/460 c.i.d. Ford V8 applications. It has cast and vertically machined fuel injector bosses for proper fuel injector placement. It is also drilled to accept Edelbrock Fuel Rail kit #3645 and support brackets, for easy attachment. Designed to accept standard flange throttle bodies. This manifold not equipped with EGR. Will not fit 1988-later models or 429 Cobra-Jets.
Installation Notes
Intake gasket: Edelbrock # 7223 or Fel-Pro # 1230/# 1231
Manifold height: A-3.50",B-4.25"
Throttle body pad height: 3.87"
Throttle body recommendations: Edelbrock # 38783, 4150 style 4V.
Port exit dimensions: 1.75" x 2.10"
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Center Maximum Height 3.870 in
CNC Ported No
Front Maximum Height 3.500 in
Material Aluminum
Rear Maximum Height 4.250 in
Single Or Dual Plane Type Single Plane
California Residents: Proposition 65 Warning
