Legendary Wheel Co. 4-Lug 15"X7" HB45 Alloy Wheel Mustang 65-73 Gold Haze/ Machined

This cast aluminum wheel is finished with a brilliant gold haze that's sure to set you and your Mustang apart on the road and in the show room. The design was inspired by by both the vintage A/C Cobra and the modern "Eleanor" wheels to bring together decades past and decades happening into a seamless, one-piece part. This wheel was built to fit most 4-lug 1965-1973 Mustangs with the factory 4 x 4.5" bolt pattern and 4.25" of backspacing. For your convenience, it will clear most aftermarket brake kits. This wheel does not include the lug nuts necessary for installation and can be used with the optional screw-on spinners that makes it timeless.

Wheel Specifications:
- Size: 15” x 7”
- Lugs: 4 x 4.5”
- Finish: Gold Haze with Machined Lip
- Offset: +6.9mm
- Backspacing: 4.25”
- Weight: 16 lbs.
- Center Cap: Included
- Single Wheel or Set of 4 Wheels

Tech Tip: Even though these wheels are intended to fit most 4-lug 1965-1973 Mustangs with the original 4” x 4.5" bolt pattern and 4.25" of backspacing. It is a general rule of thumb, you should always measure and verify clearance before ordering aftermarket wheels, as modifications may, or will be necessary for fitment on your classic Mustang.

*Lug nuts for installation (P/N: WHLLN22 or WHLL59) are sold separately.
*Legendary Wheel Co. “L” logo Center caps are included with the Legendary Wheel Co. wheels. Spinner style center caps (LWCSAS) are sold separately. Lug nuts are not included, CJ Pony Parts carries the correct lug nuts for installation of Legendary Wheel Co. wheels.

Additional Notes:
- For 1965-1966, 215/60-15 tires are recommended with 15x7” wheels but will require modifications for correct fit. For 1967-1968, 225/60-15 tires are recommended with 15x7” wheels. For 1969-1973, 235/60-15 tires are recommended with 15x7” wheels.
- These wheels require the use of extended thread lug nuts WHLLN118 or extended wheel studs.