Maximum Motorsports K-Member With 2-Point Chassis Brace 5.0L Mustang 1979-1995

If you would like to improve the steering response and handling of your 1979-1995 Mustang with a 5.0L engine, purchase a brand new Maximum Motorsports K-Member With 2-Point Chassis Brace (MMKM-1) from CJ Pony Parts. Proudly made in the U.S.A., this stiff K-Member design prevents flexing and is 26% lighter than the factory K-Member found on your 1979-1995 Mustang.

Features and Benefits:
- Constructed from High-Quality Tubular Steel
- Black Powder Coated Finish
- Improves Suspension Geometry
- 26% Lighter than Stock K-Member
- Proudly Manufactured in the USA! (San Luis Obispo, California)
- Raised Front Control Arm Pivot Points (Street and Race)
- Control Arm Pivot Points Move Straight Forward 0.75”
- Maintains Stock Engine Mount Height
- 2-Sets of Engine Mount Holes to Choose from Moves Engine (Stock or 1” Rearward)
- Includes Detailed Installation Instructions
- Track Tested K-Member

Constructed from high-quality tubular steel, the motor mounts on the K-member are in the factory location but also include additional locations so you can move the engine rearward by 1”. The Front Lower Control Arm Mounts are shifted 0.75” straight forward, this will increase positive caster and moves the center of gravity slightly rearward for improved weight distribution. 

Kit Includes:
- Maximum Motorsport K-Member (5.0L Motor Mounts)
- K-Member 2-Point Chassis Brace
- Pair of Flat Washers (5/8”)
- Pair of Flat Washers (M12 x 24mm OD)
- Set of Six Flat Washers (1/2”)
- Pair of Grade 8 ½” – 20 x 1-1/4” Hex Bolts
- Pair of Grade 8 ½” – 20 x 2” Hex Bolts
- Pair of Low Profile Front Control Arm Bolts
- Pair of Angle Iron Guides
- Set of Four K-Member Brace Spacers

Vehicle Fitment:
- 1979-1995 Mustangs with a 5.0L Engine

ATTENTION: Due to increased demand for this hand built product, this part may take up to eight weeks for shipment.