Correcting the suspension geometry in the rear of your 2005-2014 Mustang should be a top priority. With these Lower Control Arm Relocation Brackets from Maximum Motorsport, you will be able to move the instant center location upwards and rearwards to increase the anti-squat percentage, therefore increasing traction. These brackets are a must for lowered Mustangs!
Lowering your Mustang alters the angle of your rear lower control arms. Once lowered, the rear of your lower control arms will be higher than the front, this will cause unwanted wheel hop, traction loss, and overall bad handling. Maximum Motorsport helps solve this with not only a rigid design but adds multiple control arm mounting holes to allow fine-tuning of the anti-squat percentage for the optimum launch and traction.
Features and Benefits:
- Improves Overall Ride Quality
- Black Powder Coat for Corrosion Resistance
- Reduces Understeer on Lowered Mustangs
- Complete Bolt-On Installation
- Helps Lower 60 ft. Times at the Drag Strip
- Includes All Necessary Hardware and Instructions
- Sold as a Pair
*These Relocation Brackets do NOT fit with the Eibach Rear Adjustable Sway Bar.
Maximum Motorsport's Engineering Team load tested these brackets, as well as brackets from other manufacturers. The claimed superiority of weld-on brackets over bolted-on brackets was quickly disproved by their testing. It is the design of the bracket that ensures strength, not the method of attachment. All other relocation brackets started deflecting at much lower load levels than the Maximum Motorsport designed relocation bracket.
- 2005-2014 Mustang
ATTENTION: Due to increased demand for this hand built product, this part may take up to eight weeks for shipment.