Maximum Motorsports Panhard Bar With Natural Aluminum Finish Mustang 1979-1998

Prevent axle movement and improve handling on your Mustang with this Maximum Motorsports Panhard Bar! Make your handling more consistent, with bolt-on installation and a natural aluminum finish!

Features and Benefits:
- Bolt-On Installation
- Natural Aluminum Finish
- Improves Straight-Line and Cornering Stability
- Makes Handling more Predictable, Increasing Control
- Helps keep vehicle straight during Hard Launches
- Clears Stock Tailpipes and Aftermarket 2-1/2” Tailpipes that follow the Factory Routing
- PTFE-Lined Spherical Rod Ends
- Rod Ends are mounted in Double Shear for Greatest Strength and Safety
- Roll Center is Lower than what can be achieved with a Watts Link
- Proudly Manufactured in the USA!

The Panhard Bar limits side to side movement of your Mustang' rear axle. This makes cornering and hard acceleration more predictable to improve your times! and The Maximum Motorsports Panhard Bar is a bolt-on installation and is proudly manufactured in the USA!

Please Note: Maximum Motorsports recommends a Low Profile Differential Cover to clear the Panhard Bar (M4033G2).

Tech Tip: When installed with the OEM 4-link rear suspension design, Maximum Motorsports strongly recommend using stock upper control arms with rubber bushings.

Vehicle Fitment:
- 1979-1998 Mustangs with a 8.8 Rear End
- 1979-1998 Mustangs with a 7.5 Rear End
- Ford 9” Rear Ends that are installed on a 1979-1998 Mustang.