Maximum Motorsports Roll Bar Drag Race 6-Point With Swing-Out Door Bars/ Fixed Harness Mount Mustang Coupe/ Hatchback 1979-1993

Designed by Maximum Motorsports, this 6-Point Drag Race Roll Bar (MMRB-2) is equipped with Removable Swing-Out Door Bars for increased side-impact safety. It also includes a fixed harness mount tube that provides a safe attachment point for 5-point harness shoulder belts. The roll bar will bolt to the chassis of your 1979-1993 Coupe or Hatchback Mustang without welding.

The roll bar will increase the rigidity of your Mustang's chassis. The removable swing-out door bars pivot outward, parallel with the doors, for easy entry. They can also be completely removed from the car in a matter of seconds!

Maximum Motorsports manufactures all their Roll Bars from the highest quality materials and hardware. They are made of 1-3/4" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing). Contour-hugging 6" x 6" mounting pads with backup plates sandwich the unibody for safe and strong mounting. All hardware is Grade 5 or higher. Maximum Motorsports roll bars are designed to fit with your stock Mustang interior.

Features and Benefits:
- Removable Swing-Out Door Bars
- Stiffens Chassis
- Grade 5 or Higher Hardware
- Increases Side-Impact Safety
- 1-3/4" Diameter by 0.134" Wall DOM Tube

When it comes time for installation, the roll bar will simply bolt to the chassis. The floor pan is sandwiched between the roll bar mounting pads and the back-up plates underneath the floor pan. There is a significant clamping force between the two pads, providing a very secure method of attachment. Although the roll bar does not weld to the chassis you will need to weld the rear supports to the main hoop.

All of Maximum Motorsports roll bars are uncoated, bare steel. For a high-quality finish, the installer should paint or powder coat the roll bar as part of the installation. Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.

Please Note: Drag Race roll bars conform to NHRA and NMRA rules.

ATTENTION: Due to increased demand for this hand-built product, this part may take up to eight weeks for shipment.