Maximum Motorsports Roll Bar Street 4-Point Without Door Bars/ Harness Mount Mustang Coupe/ Hatchback 1979-1993

Increase both safety and the rigidity of your 1979-1993 Coupe or Hatchback Mustang's chassis with a Maximum Motorsports Street Roll Bar (MMRB-1.1). The Street roll bar offers rollover protection and easy access to the rear seat. 

Maximum Motorsports manufactures all their Roll Bars from the highest quality materials and hardware. Made of 1-3/4" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing). Contour-hugging 6" x 6" mounting pads with backup plates sandwich the unibody for safe and strong mounting. All hardware is Grade 5 or higher. Maximum Motorsports roll bars are designed to fit with your stock Mustang interior.

Features and Benefits:
- Rollover Protection
- Stiffens Chassis
- Grade 5 or Higher Hardware
- 1-3/4" Diameter by 0.134" Wall DOM Tube

The Maximum Motorsports Roll Bars for Mustang coupes and hatchbacks are designed to bolt to the chassis, without welding. The floor pan is sandwiched between the roll bar mounting pads and the back-up plates underneath the floor pan. There is a significant clamping force between the two pads, providing a very secure method of attachment. Although the roll bar does not weld to the chassis you will need to weld the rear supports to the main hoop.

All of Maximum Motorsports roll bars are uncoated, bare steel. For a high-quality finish, the installer should paint or powder coat the roll bar as part of the installation. Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.

Please Note: This roll bar does NOT conform to NHRA and NMRA rules.

ATTENTION: Due to increased demand for this hand-built product, this part may take up to eight weeks for shipment.