PerTronix Distributor Flame-Thrower Red Female Cap Billet Ignitor III 260/289/302

Is the original distributor for the ignition system for the 260, 289 or 302 engine in your classic Ford not performing as well as it used to? Then maybe it is time to upgrade to this PerTronix Red Flame-Thrower Female Cap Billet Distributor with Ignitor III from CJ Pony Parts!

Designed to provide your 260, 289 or 302 engine with maximum ignition performance, this Flame-Thrower Female Cap Billet Distributor with Ignitor III from PerTronix is a performance distributor that will replace the outdated points or electronic distributor in your classic Ford and features PerTronix’s Ignitor III electronics. The Ignitor III is a powerful microcontroller featuring adaptive dwell algorithms that maintain peak energy throughout the RPM band for increased performance as the dwell angle constantly adjusts. It also features an adjustable rev limiter built in with LED feedback that is accurate to +/- 50 RPM! This Ignitor III system will produce up to 4 times more energy between the 3000-5000 RPM range than a standard ignition system. All this comes in billet housings with a CNC polish for a beautiful look with a red cap that utilizes female connectors.

PerTronix Flame-Thrower Female Cap Billet Distributor D7130701 Features and Benefits:
- Integrated Ignitor III technology
- Adaptive dwell control
- A powerful micro controller with adaptive dwell algorithms constantly adjust the dwell angle to maintain peak energy throughout the entire RPM range for increased high and low RPM performance
- The Ignitor III compensates for the inherent electronic delay by adjusting the spark timing throughout the enter RPM range
- Synchronized peak current and spark timing reduces heat build-up
- Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution
- Polished CNC machined billet housings
- Tempered distributor shafts have low torsion displacement for accurate timing and longer life
- Upper ball bearing and extra-long oil impregnated bronze lower bushing; reduces friction and high RPM vibration
- Precision stamped advance weights eliminate erratic timing
- Adjustable mechanical advance with proprietary limiting functions permits multiple settings
- Factory set with a performance advance curve
- Comes with extra springs for custom advance curves
- High dielectric strength cap with female brass terminals and premium rotor with brass contact
- Compatible with most Capacitive Discharge Systems
- Legal in all 50 states and Canada (C.A.R.B.E.O. #D-57-12)

*Flame-Thrower billet distributors are frequently used in tight engine compartments due to their Plug n' Play design and relatively small size.

*Although PerTronix distributors fit their intended engine application, each vehicle application must be evaluated independently to ensure adequate space for distributor fitment as well as air cleaner and hood clearance.

Applications:
1965-1973 Mustang
1966-1977 Bronco
1948-1979 F100

If you have an older Ford, you've probably replaced the points and condenser in the distributor a few times during tune-ups. However, what if there were modern parts for classic Fords that eliminate the need for distributor maintenance? With the products from PerTronix, there is, allowing you to have a much more reliable and maintenance free ignition. These products, along with the other high-quality upgrade parts from PerTronix can help give your ignition system a complete make-over!

Order this PerTronix D7130701 Red Flame-Thrower Female Cap Billet Distributor with Ignitor III for your 260, 289 or 302 Engine from CJ Pony Parts today!