Ron Morris Rear Shock Plate Pair 8"/9" 1965-1973
Pair of Ron Morris Rear Shock Plates for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 8" or 9" Rear End.
When you trailer your 1965-1973 Mustang make it easy with a Pair of Rear Shock Plates from Ron Morris. These Ron Morris Rear Shock Plates includes a bracket that allows you to easily strap down the rear end of your Mustang. The Rear Shock Plates will work on all 1965-1973 Mustangs with an 8" or 9" rear end housing. All the correct holes are pre drilled for the Rear Leaf Spring U-bolts and the center alignment pin.
- Fits 1965-1973 Mustangs
- Built in Tie Down Strap Brackets
- Black Powder Coat Finish
- Easy Installation
Please Note: The Rear Leaf Spring U-bolts are not included with the Ron Morris Rear Shock Plates.
Once the heavy gauge steel forms the Rear Shock Plates, they are fully tig welded and powder coated in a black finish. A pair of original style shock tabs are welded in the ideal location. This makes for any easy installation for any skill set mechanic. Since Ron Morris allows you to install these shock plates on an 8" and a 9" rear end the holes are slightly oblong for the different axle tube diameters.
Ron Morris also provides customers with information and helpful instruction for every aspect of converting an early model Mustang to a new engine or transmission assembly. With information covering everything from EFI conversions to full transmission and engine swaps, there is no doubt that Ron Morris will be able to give you the push in the right direction that you need to get your next project well underway, especially when combined with the helpful information from CJ Pony Parts' vast wealth of Mustang experience and expertise.
Purchase a new Pair of Ron Morris Rear Shock Plates for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with an 8" or 9" Rear End from CJ Pony Parts today!
California Residents: Proposition 65 Warning