TMI Seat Foam Standard Seats Low Back 1981-1993

CJ's Part Number:
SF12-V
From
$162.99

TMI Seat Foam for all 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 and 1993 Mustangs with Standard Low-Back Seats.

Have the seats of your Fox Body become worn out and rigid over the years? Then give them a proper restoration with TMI's new Seat Foam for all 1981-1993 Mustangs with Standard Low Back Seats. This seat foam is intended to allow you to give your seats a new luxurious look & feel, while reusing the original seat frame so you won't have to replace the entire seat. CJ Pony Parts now sells this stylish seat foam individually or in a pair for your front bucket seats.

Features:
- Thick & Durable
- Provides More Comfort
- OEM Quality
- Fits Passenger or Driver Side

TMI's seat foam for standard low-back seats specifically designed for '81-'93 Mustangs are a great idea when you decide to install new upholstery or freshen up an old seat. Made to fit the original factory details, the seat foam is thick & durable, making for a long lasting, comfortable feel while your cruise in your Mustang. This seat foam fits either your driver or passenger side front bucket seats, making for an excellent replacement while renovation your 1981-1993 Mustang's interior.

Please Note: This seat foam is for use with low back seat frames found in most 4-cyl LX & some 5.0L LX Mustang models.

TMI Products has been an industry leader for over 30 years with supreme-quality upholstery, door panels, consoles, seat foam and many other Mustang interior products. Each product is completely made in the USA with special attention being made to upholding the highest quality & using the best possible materials, solidifying them as the best on the market.

Order TMI's Seat Foam for your 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 or 1993 Mustang with Standard Low-Back Seats from CJ Pony Parts today!

Note: Due to the premium nature of TMI products, these made-to-order parts may take up to ten weeks to ship if they are out of stock.

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Installation Videos

Video Transcript

Bill: Today, we are taking a look at some ways to upgrade your Mustang's interior using premium products from one of our more popular vendors, TMI. TMI has been an industry leader for over 30 years, producing interior products for your '64 through 2013 Mustang. Today, we have a special guest in our studio, TMI sales manager Waylon Crumrie. Waylon, thanks for coming.

Waylon: Thanks for having me Bill.

Bill: I'm sure that you get this a lot, but what does TMI stand for?

Waylon: TMI was founded in 1982 by four brothers whose last name is Tuccinardi. You get Tuccinardi Manufacturing Incorporated.

Bill: How did you get in to the Mustang market?

Waylon: Originally we started doing Volkswagen interiors, but we quickly saw the market demand for high-quality premium Mustang upholstery and so we have been doing that now for about 25 years.

Bill: Where do you manufacture your products?

Waylon: We manufacture in Corona, California, where we have about 140,000 square feet and nearly 200 employees who do 100% of our manufacturing right here in the U.S.A.

Bill: I hear that you have some new products for us today?

Waylon: I sure do. Do you want to take a look?

Bill: Sounds good. Waylon, a lot of our customers do not know a lot about seat foam and I hate to admit it, but I do not know much about it myself. What makes your premium different than your standard seat foam?

Waylon: That is a good question and I am happy to clarify, because we do get that question a lot. You know, on the surface these two foams appear almost identical. They are both '64 to '66, close cell high-density foam but the difference between our standard foam and our premium is when you get a little closer. Originally, foams were designed like this. Just an empty channel where you would hog ring through and the frustration would be is that you would blindly have to poke through this with your hog ring and find an attachment point on the back. What we have done, in order to save frustration, especially for the first time installer, if this is your first install on upholstery, this will definitely save you some time and again the frustration of blindly trying to find an attachment point.

We actually molded the listing channel directly in to the foam so that you can visually see it without having to, like I said, blindly search through the back of the foam, hoping to find the right place to attach. One more thing that I would like to point out that we do in order to ease the installation for the first time installer and actually the experienced installer is that normally you would have to lay down burlap in between the foam and the springs to help protect the foam from being punctured by the springs. Both of our standard and our premium foams come with a protective layer already adhered to the back of the foam. Again, this is so you don't have to use burlap in addition to this and it will suffice in keeping your foam safe from punctures from the springs.

Bill: Waylon, what model of Mustang do you offer foam for?

Waylon: We offer our standard and premium line for the '64 to '73 Mustang and then we pick it up again and do it from '79 to 2007 and that is including the special edition Mustang's like the Cobra, Bullitt, and Mach 1.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart