Total Control Products Leaf Spring Suspension Kit Stage 1 With Fixed Valve Shocks And Mid-Eye 4-1/2 Leaf Springs 1965-1973
- 4-1/2 Leaf Pack
- Mid-Eye Configuration
- 140 Lb. In Spring Rate
- Factory Set Varishocks
Total Control Products Stage 1 Leaf Spring Suspension Kit with Mid-Eye 4-1/2 Leaf Springs and Fixed Valve Shocks for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.
Are you looking to upgrade the leaf springs on your 1965-1973 Mustang? If so it might be a great idea to replace the factory suspension and replace it with this high performance kit from Total Control Products. This Total Control Product Stage 1 Leaf Spring Kit is designed to fit in the same location as the original leaf springs. Total Control Products provides you with everything necessary for a proper installation.
- Pair of 4 1/2 Leaf Mid-Eye Leaf Springs
- Pair of Fixed Valve, Quickset Shocks
- Heavy Duty Spring Shackles
- VariShock Shock Mount Plates
- Leaf Spring Plates with Integrated Tie-Down Loops
- Polyurethane Bushings
- All Necessary Grade 8 Hardware
Please Note: This Rear Leaf Spring Suspension kit does not include the rear sway bar or the Axle U-bolts.
Mid-eye 4-1/2 leaf springs have a counter bend at the base of each eye which repositions the mounting bolts to sit along the centerline of the spring stack. This brings the axle closer to the chassis, which results in your 1965-1973 Mustang being lowered half the diameter of the springs eyes, or approximately a 1" drop. The 4-1/2 leaf configuration is slightly more rigid than the stock leaf springs and is the correct choice for mostly street driven vehicles. These 4-1/2 leaf mid-eye leaf springs have a spring rate of 165 lb/in and are perfectly suitable for street driving.
This Leaf Spring Suspension System from Total Control Products are available with the single adjustable Quickset 1 Shocks. These high quality Quickset 1 Shocks have a single adjustable mode with 16 settings, where both bump and rebound are adjusted simultaneously. The VariShock single adjustable QuickSet 1 Shocks have a knob with 16 settings to tune the firmness of the VariShocks to your desired preference. The American made VariShocks are constructed from premium components which means each shock performs identically, unlike other cheaper shocks. Total Control Products' revolutionary adjustment mechanism uses Deflective Disk Valuing in the pistons to eliminate spring fatigue.
The included shocks mount is a direct replacement leaf spring plates that have 1-1/2” x 3-11/16” oversized tie down loops that add a nice convenience when installing this leaf spring suspension kit. The tie down loops make it easy to identify where to mount the ratchet straps making it easy to strap down while towing. There is also a 1/4” thick shock mount tab that is relocated slightly forward to accommodate the brake line on Mustangs with 9” housings. These plates and mounting tabs are zinc plated, making for an attractive, professional look and feel to top off your suspension upgrade with.
Total Control Products offers the highest quality suspension and steering components available for early-model Ford Mustangs. Their latest product selection is viewable above, and includes everything from bump steer kits, shock tower braces and coil over packages, to engine mounts, sub frame connectors, driveshaft safety loops and suspension kits. Total Control Products is constantly attempting to improve upon their already sterling reputation and their product quality control, and they have partnered with several smaller companies in order to do that.
Purchase a new Total Control Products Stage 1 Leaf Spring Suspension Kit with Mid-Eye 4-1/2 Leaf Springs and Fixed Valve Shocks for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Advanced skill is required for this installation.