Ford Racing Clutch Kit for 1986-2001 V8 Mustangs.This kit features a heavy duty diaphgragm type clutch assembly with approximately 40% more capacity than a stock Mustang clutch. What this means is that the clutch pedal is little tougher to push. Some people prefer this type of clutch over the soft pedal for a race car feel.
The clutch disc fits a 1-1/6", 10 spline input shaft. A clutch disc, pressure plate and throwout bearing are included. A roller pilot bearing is recommended (M7600A or M7600B). Metric fasteners and dowel pins must be used with 10.5" clutches (M6397A302).
Please note: 2001 Mustang Owners must check the transmission code on their data tag to verify which transmission they have. If it says 6 this clutch kit will work. If it says K then this clutch kit will not work.
*Does not fit 1999-2001 Cobras.
*It is okay to mix and match Ford Racing clutch discs and pressure plates, but do NOT install a Ford Racing pressure plate with a stock disc or vice-versa as disengagement problems may occur.
*Clutches have NO warranty.
Similar Mustang PartsMore Clutch Kit
Product ReviewsWrite a review
You Might Also Like
Regular Price: $17.99
Special Price: $16.19
Regular Price: $12.99
Special Price: $10.39
Regular Price: $10.99
Special Price: $9.89
CJ's Low Price:$41.99
The kit includes this 10 1/2 inch organic disc for high power handling. It will still have a decent pedal feel. It's a 10 spline to work with your factory transmission, includes a throw out bearing and their heavy duty pressure plate. The pedal feel of this clutch can only be slightly heavier than your stock clutch. We recommend it for Mustangs making it up to 400 horsepower.