Shift Knob 2-1/8" Solid Color Fiesta ST 2014-2015/Focus ST 2013-2014/Mustang 2005-2015

CJ's Part Number: MSK231-V
MSRP: $31.99
CJ's Low Price:
1427846400 42405
Based on your selection, you may be interested in the following item.
Earn 28 RPM Points What's this?
MSK231-V Play Shift Knob 2-1/8

Product Description

Solid Color 2-1/8" Shift Knob for all 2014-2015 Fiesta STs, 2013-2014 Focus STs, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 and 2015 5-Speed and 6-Speed Mustangs and 2007, 2008 and 2009 Shelby GT500s.

Tired of that boring shift knob in your 2014-2015 Fiesta ST, 2013-2014 Focus ST or 2005-2015 Mustang, then replace it with this 2-1/8" Solid Color Shift Knob. With this shift knob you have the ability to choose from a variety of color options to give this aggressive design a little individual flair to put in your interior.

- Available in a Variety of Colors
- Manufactured Using Premium Partek Resins
- Engineered for Strength and Durability
- 2-1/8" Knob Diameter
- 12mm x 1.25 Thread Pattern
- Made in the USA

These manual shift knobs are American made and are very similar to your typical billiard balls. The knobs are designed using the same high-quality partek resins and are manufactured for long-term strength and durability. These solid color shift knobs also feature a 2-1/8" diameter and the correct 12mm x 1.25 thread pattern to comfortably fit in your 2014-2015 Fiesta ST, 2013-2014 Focus ST or 2005-2015 Mustang.

*All shift knobs are custom made to order and take 3-4 weeks to ship from CJ Pony Parts.
*Does not fit 2010-2014 GT500s, which have a 10mm x 1.25 thread pattern.

Please Note: For the 2005-2014 Mustang a jam nut is required with these shift knobs. A jam nut or threaded shift boot retainer is required to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended over the jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer you run the risk of splitting the shift knob if you over tighten the shift knob and it bottoms out on the shift handle.

Please Note: For 2014-2015 Fiesta STs, 2013-2014 Focus STs and 2015 Mustangs the use of a shift knob adapter (HW3290 or HW3291) is required with these shift knobs to properly operate the pull-up style reverse lockout function. Without this adapter you will lose the ability to shift into the reverse gear.

Purchase a Solid Color 2-1/8" Shift Knob for your 2014-2015 Fiesta ST, 2013-2014 Focus ST, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 or 2015 5-Speed or 6-Speed Mustang or 2007, 2008 or 2009 Shelby GT500 from CJ Pony Parts today!

Similar Mustang Parts

similar mustang parts More Mustang Shifters  

Installation Instructions


Difficulty: Easy

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review

Product Questions


You Might Also Like

Product Video

By Bill Tumas: If you're looking for any easy upgrade for the interior of your Mustang, you can't go wrong with an aftermarket shift knob. Here at CJ's we have a huge selection, including these 2 1/8" diameter USA made knobs, available in 13 colors. With or without stripes, with your choice of graphic, there's over a thousand different options available.

You should have no trouble finding one that looks great in your Mustang.

Installation for the shift knob is very easy. If you're early Mustang you'll have to thread on this jam nut. If you're '05 and up, we carry these retainers that will hold your boot in place once you install the after market knob.

All the knobs are available in solid colors, without any graphics whatsoever. If you chose to go with a graphic, we offer the 5.0, the running horse, the snake, the GT, as well as a Boss 302. If you choose to go with a pattern, stripes are available as well. And if you prefer, you can actually have the graphic added to the side.

In our case, we had this custom one made for our CJ race car with our CJ emblem on the side. We'll be installing this one.

Since quarter mile performance has been the goal with our gotta have it race 2013 GT, we're still running the stock shift knob. We'll remove this one and install our new green knob. Get a good grip on the knob and turn it counter clockwise.

First step for the installation of the new knob is to install its retainer. The retainer's gonna hold the boot in place and also work as a jam nut for the knob. Thread your retainer down until it's touching your shift boot. Grab your shift knob, line up the threads. Start threading it on. Now, if you thread it all the way down, it probably isn't gonna line up straight.

What you'll wanna do then is loosen it up until it's about an eighth of a turn from straight, thread the retainer upward. Get a good grip on it, turn it until it's straight. As you can see our shift knob was a nice additional upgrade to our interior. It only took a few minutes to install. You'll be back on the road in no time.