B/G Rod Works Old School Wheel 17"x8" Gunmetal With Machined Lip 1965-1973

CJ's Part Number:
W1055-V
From
$159.99

B/G Rod Works Gunmetal 17" x 8" Old School Wheel with a Machined Lip for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.

Restoring your Mustang comes with a lot of work and decisions. If you're trying to keep the classic styling while getting the modern performance upgrades you desire, check out this Gunmetal 17" x 8" Old School Wheel with a Machined Lip from B/G Rod Works. This wheel's design was inspired by traditional hot rods and will give your Mustang an aggressive look that will compliment any body color or style.

The Old School Wheel (OS 780-5114-00 GML) is constructed from cast aluminum which provides better weight savings and durability than traditional steel alternatives. The five spoke design comes from the muscle car era style. It will clear most modern brake upgrades while accommodating original equipment backspacing, so no major modifications are necessary for installation. The wheel is finished in a gunmetal gray with a machined lip for a timeless look. A chrome center cap with the B/G Rod Works logo is included.

Wheel Information:
- Size: 17” x 8”
- Lugs: 5 x 4.5”
- Finish: Gun Metal With Machined Lip
- Offset: 0 mm
- Backspacing: 4.50”
- Weight: 22.4 lbs.
- Center Cap: Included

Please Note: This B/G Rod Works wheel requires small diameter, tuner style lug nuts. Larger OEM style lug nuts will not work.

Tech Tip: Even though these wheels are intended to fit the rear of most 5-lug 1965-1973 Mustangs with the original 5 x 4.5" bolt pattern and 4.50" of backspacing. It is a general rule of thumb, you should always measure and verify clearance before ordering aftermarket wheels, as modifications may, or will be necessary for fitment on your classic Mustang.

This wheel can be purchased individually or as two separate sets. The square set includes four 17" x 8" wheels and is recommended only for 1969-1973 Mustangs. The staggered set, which includes two 17" x 7" wheels for the front and two 17" x 8" wheels for the rear, can be installed on any 1965-1973 Mustang. Staggered sets offer a more aggressive stance and better traction on the road.

*Lug nuts for installation (P/N: WHLLN7) are sold separately.
*Square Set isrecommended for 1969-1973 Mustangs only.
*For 1965-1968 Mustangs, 17"x8" wheels are recommended for use on the rear only. Wider wheels can rub on the wheel openings when turning.

Order this B/G Rod Works Gunmetal 17" x 8" Old School Wheel with a Machined Lip for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.