Legendary Wheel Co. 17"X8" GT9 Alloy Wheel Mustang 65-73 Black/ Machined

This high-quality wheel enhances the performance and exterior appeal of your 1965-1973 Mustang. It can be ordered individually, as a set of 4, or as a staggered set of 4. This 1-piece cast aluminum wheel features a machined face and black-painted spokes. The design was inspired by wheels from the 1969-1970 GT350 and GT500. It's a combination of the original Torque Thrust and iconic Magnum 500 wheels.

Wheel Specifications:
- Size: 17” x 8”
- Lugs: 5 x 4.5”
- Finish: Machined with Black Spokes
- Offset: +7mm
- Backspacing: 4.75”
- Weight: 18.5 lbs.
- Center Cap: Included
- Available Individually, as a Set of 4, or as a Staggered Set of 4

*Lug nuts are sold separately.
*The square set of wheels comes with four (4) 17"x8" wheels. 
*The staggered set of wheels comes with 17”x7” front wheels and 17"x8" rear wheels.
*Legendary Wheel Co. “L” logo Center caps are included with the Legendary Wheel Co. wheels.  Original-style center caps with Ford-licensed logos are sold separately and require P/N: CCWA1 for installation. Lug nuts are not included, CJ Pony Parts carries the correct lug nuts for installation of Legendary Wheel Co. wheels.

Vehicle Fitment:
- 1965-1973 Mustangs

Additional Notes:
- This 17”x 8" wheel is intended for rear fitment only in 1965-1968 Mustangs, as wider wheels can rub on the front wheel opening when turning. The square set of 17"x8" wheels are recommended for 1969-1973 Mustangs only.
- These wheels require the use of extended thread lug nuts WHLLN118 or extended wheel studs.

Tech Tip: Even though these wheels are intended to fit the rear of most 5-lug 1965-1973 Mustangs with the original 5 x 4.5" bolt pattern and 4.75” backspacing. It is a general rule of thumb, you should always measure and verify clearance before ordering aftermarket wheels, as modifications may, or will be necessary for fitment on your classic Mustang.